Ultrasonic Cleaner - 2 litres - degas - sweep

The degassing function (D)

The degassing function (D) causes that the gases present in the liquid (for example carbon dioxide) will be driven out. Freshly added cleaning fluid (or when unused for a longer period) contains gases, which have a lasting negative influence on the cleansing effect. 5 – 10 minutes before use, degassing the liquid in the oscillating tank is necessary (without accessories and cleaning products). This process has to be done after filling the container or after a standing time of one day. Without this function the ultrasonic effect of the device would be strongly dampened. During the degassing the cavitation noise is reduced – the ultrasonic cleaner works more quietly. The reduction of the noise level does not mean that the ultrasonic power subsides but rather illustrates the end of the degassing process and an improvement of the cleaning effect. If the degassing function is not used the whole ultrasonic energy in the fluid would be burnt because of the friction of the wavefronts. The result is that no energy reaches the workpiece. Degassing reduces the cycle time of the ultrasonic device significantly as it ensures the quick degassing without accumulation of bubbles. Consequently this process offers you a decisive advantage: Only in sufficiently degassed fluid the formation of cavitation bubbles can occur, making the cleaning process more efficient. This new technology is used because it efficiently accelerates the cleaning process – particularly in freshly mixed baths. The degassing function of this high-quality device is a very gentle and efficient cleaning process, which speeds up the degassing of liquids very quickly. The ultrasonic effect in the prepared liquid also provides a degassing effect but, depending on the tank size, it is more time consuming. The main advantage of the degassing function is that it actively supports you, especially when cleaning up dirty objects as well as cleaning silver, copper and brass. The degassing function is simply more practical and time-saving!

The sweep function (S)

The sweep function (S) can be activated and allows via frequency modulation for an ideal sound field distribution in the cleaning fluid. This device is equipped with a brand new ultrasonic generator with special ultrasonic transducer. This device is different from other ultrasonic cleaner since it has the sweep function as an additional feature. In a direct comparison with a conventional system with a normal generator without sweep function, this innovative generator is more satisfying because of the contrasting distribution of the ultrasonic waves in the cleaning fluid. The resulting waveform, like it can be seen in the graphics, shows the efficiency the sweep function. The perfect cleaning result in the end speaks for itself:

How does the sweep technology of the professional ultrasonic cleaner Proclean 2.0DS by Ulsonix work?

When using the sweep technology the output frequency is modulated around the central frequency value. This means that the oscillating systems of the innovative ultrasonic generator work with a frequency of 37 kHz. Additionally, this oscillating system can be modulated with a frequency of 36 and 38 kHz. This procedure reduces the cleaning time considerably and it prevents the damage of sensitive objects when cleaning. The sweep technology makes it easier for the ultrasonic waves to get through the grid of the hanging basket in order to reach the item to be cleaned. The cleaning results improve and the ultrasonic cavitation in unusual cleaning fluids will be more supported. This cavitation effect cannot be found in conventional devices. The effect of the stationary waves will be reduced and therefore the distribution of ultrasonic energy in the cleaning fluid increases efficiently and effectively.