Plasma Cutter - 60 A - 400 V

Manufacturer: Stamos Pro Series | item number: EX10020004 | Model: S-PLASMA 60P / PRZECINARKA CUT 60

Plasma Cutter - 60 A - 400 V
Plasma Cutter - 60 A - 400 V
Plasma Cutter - 60 A - 400 V
Plasma Cutter - 60 A - 400 V
Plasma Cutter - 60 A - 400 V
Plasma Cutter - 60 A - 400 V
Play Video
360° photo
Tap to open gallery
Instead of: 549.00€   You save 130.00€   419.00 Instead of: 549.00€  

Prices incl. VAT

  • Free shipment to Ireland


    This product is currently not available.

  • 30 days return service

  • 3 years guarantee

Product highlights

  • High cutting speed
  • PRO Series - Cable: 8 m
  • Cutting current: 20 – 60 A
  • Power ventilator
  • 400 V high voltage current

The plasma cutter is perfectly suited for precisely cutting stainless steel, cast iron, copper, brass and other electroconductive metals of up to 20 mm thickness. It generates a light arc with very high temperatures which allows you to cut through thick steel as if it were butter. The cutting current of the plasma cutter S-Plasma 60P is adjustable between 20 and 60 amps, which means that the device is adaptable to all conditions. First-class cutting quality, separation cuts and precision. Even at the more difficult end parts you get perfect cuts, thanks to the high reserve capacity. This high quality allows for better results with less reworks.

Show more Show less

Saving time and working efficiently is becoming more and more important. Use your time in an effective manner - with the plasma cutter from Stamos Germany. The cutting speed is high, which ensures precise and high-quality weld seams with minimal material waste. The device has a jump-start-function which allows you to start it even during the gas post-flow.

Show more Show less

Adjust the strength of the current to your needs. The seamless adjustment of the current is effected with a simple and practical rotary knob. You can change the parameters quickly and easily, without needing to remove your protective gloves. Even in bad lighting conditions, you can always see the display clearly.

Show more Show less

As protection against overheating, the plasma cutter has a high-powered ventilation system that cools the device during operation. During a prolonged use, overheating might occur. This will be indicated with a control/warning light. Keep an eye on the lamp to stay safe.

Show more Show less

The device is powered by 400 volts. You can also use a generator with a minimum power output of 8 kVA for mobile operation. The plasma cutter is powered with inexpensive pressurized air. You need a compressor with a pressure of ingoing air of 6,2 bar and a passage of air of 170 l/m. You can select the external compressor depending on the requirement and circumstances and adjust the air pressure via the external pressure reducer. This proves the device to be very flexible and easy to transport. 

Show more Show less

The construction stands out for its compact, robust design and its low tare weight of only 24,8 kg. The plasma cutter can be easily transported. The air-cooled cutting unit has a powder-coated sheet steel casing. The plasma cutter has an 8 m ground cable. You can work on a large scale without being hindered by a short cable.

Show more Show less

  • Exact current thanks to the seamless adjustment of the cutting current
  • High-powered ventilation for efficient cooling
  • Cost-effective with inexpensive pressurized air
  • Compact, mobile construction, versatile applications
  • Jump-start-function, even during the gas post-flow

Plasma Cutter - 60 A - 400 V

The expert for craft supplies, Stamos Germany, offers first-class plasma cutters as well as welders. The Pro-range has been developed with inverter technology and is the best choice for maximum energy savings. In workshops, in agriculture and car repair shops, you need a cutting unit that is robust, flexible and reliable. The mobile plasma cutter S-Plasma 60P combines these features. Coated or rusted materials can be easily handled. All you need is a rotary current and pressurized air.

S-Plasma 60P
Item number
Input voltage
400 V, 3-phase
Input frequency
50 / 60 Hz
Rated input current
8,2 A
Input current, max.
11 A
Rated input power
5,3 kVA
Input power, max.
7,2 kVA
Open-circuit voltage
240 V
Cutting current
20 – 60 A
Duty cycle
60 %
Cutting current at 100% DC
46 A
Cutting current at 60 % DC
60 A
Cutting power
22 mm
Kerf width
1 mm
Air flow
170 l/min
Air pressure
6 bar
Length, cable assembly
8 m
Length, ground cable
8 m
Length, power cord connection
1,2 m
Device cooling
Cooling distiller
Power factor
Efficiency (below rated power)
≥ 0.85
Insulation class
Protection class
Dimensions (LxWxH)
54 x 37 x 20 cm
24,8 kg
Shipping dimensions (LxWxH)
72 x 30 x 41 cm
Shipping weight
26,4 kg
Technical drawing
Delivery Package
  • Plasma cutter S-Plasma 60P
  • Ground cable with clamp (8 m)
  • Cable assembly (8 m)
  • 2 electrodes
  • 2 ceramic nozzles
  • 2 cutting nozzles
  • 2 ceramic rings
  • Instruction manual

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Show moreShow less

Powerful fans ensure an optimal removal of heat from the unit.


For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

Show moreShow less

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².






This device works with a 3-phase connection (400 V +/- 10 %).




Start the weld by placing pressure on the torch button. Stop the process by releasing the button.


The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.




Shows the welding / cutting parameters.


The LED light indicates overheating or a malfunction.


Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.

The diverse assortment of products from Stamos enable you to cut or join materials efficiently and precisely. Our portfolio ranges from professional soldering stations to top-class welding machines and precise plasma cutters, to the matching accessories. Let us demonstrate to you the functionality, quality and versatility – not to mention the cost-effectiveness – of our professional line. Our videos show our products in action.

Write the first review for this product

Leave a review (5 stars is highest, 1 is lowest)
Click on the link sent to your e-mail address and confirm your opinion! It will be published after verification.

The fields marked with * are required.

expondo expert

Still not sure?

Our experts are ready to help!
+44 20 376 988 02
Mon - Fri 09:30am - 04:30pm
Schweißhelm – Firestarter 500 – ADVANCED SERIES - 2984 - 1
Prices incl. VAT plus shipping costs
This product
  • High cutting speed
  • PRO Series - Cable: 8 m
  • Cutting current: 20 – 60 A
  • Power ventilator
  • 400 V high voltage current

This product is currently not available.

Plasma Cutter - 60 A - 400 V

Plasma Cutter - 60 A - 400 V

Instead of: 549.00€   419.00€  

This product is currently not available.

  • High cutting speed
  • PRO Series - Cable: 8 m
  • Cutting current: 20 – 60 A
  • Power ventilator
  • 400 V high voltage current
  • Cutting current: 10 - 50 A
  • Duty cycle: 60 %
  • Cutting depth: 15 mm
  • LED display
  • 230 V

Ready to ship today,
Delivery time appr. 4-7 workdays

Plasma Cutter - 50 A - 230 V - Basic

Plasma Cutter - 50 A - 230 V - Basic

Instead of: 429.00€   319.00€  

Ready to ship today,
Delivery time appr. 4-7 workdays

  • Cutting current: 10 - 50 A
  • Duty cycle: 60 %
  • Cutting depth: 15 mm
  • LED display
  • 230 V