Plasma cutter - 120 A - 400 V - Pilot ignition
The expert for craft supplies Stamos Germany offers first-class plasma cutters as well as welders. The Pro-range has been developed with inverter technology and is the best choice for maximum energy savings. In workshops, in agriculture and car repair shops, you need a cutting unit that is robust, flexible and reliable. The mobile plasma cutter S-Plasma 120P combines these features. Coated or rusted materials can be easily handled. All you need is a rotary current and pressurized air.
The plasma cutter is perfectly suited for precisely cutting stainless steel, nickel, titanium, zirconium and other electro conductive metals of up to 32 mm thickness. It generates a very stable light arc with very high temperatures which allows you to cut through thick steel as if it were butter. The cutting current of the plasma cutter S-Plasma 120P is adjustable between 20 and 120 amps which means that the device is adaptable to all conditions. First-class cutting quality, separation cuts and precision. You get perfect cuts, even at the more difficult end parts, because of the high reserve capacity. This high quality allows for better results with less reworks.
Saving time and working efficiently is becoming more and more important. Use your time in an effective manner - with the plasma cutter by Stamos Germany. The cutting speed is high, which ensures precise and high-quality weld seams, a deep weld penetration and minimal material distortion. The separate inverter for the auxiliary arc current ensures constant results. The device has a jump-start-function which allows you to start it even during the gas post-flow.
Adjust the strength of the current to your needs. The seamless adjustment of the current is effected with a simple and practical rotary knob. You can change the parameters quickly and easily, without needing to remove your protective gloves. Even in bad lighting conditions, you can always see the display clearly.
The optimum safety of the plasma welding torch is guaranteed by the integrated flow controller for the cooling agent. As protection against overheating, the plasma cutter has a high-powered ventilation system that cools the device during operation. During a prolonged use, overheating might occur. This will be indicated with a control/warning light. Keep an eye on the lamp to stay safe. Due to the high-frequency igniter, you only need a harmless current to ignite the arc.
The device is powered by 400 volts. You can also use a generator with a minimum power output of 8 kVA for mobile operation. The plasma cutter is powered with inexpensive pressurized air. You need a compressor with a pressure of ingoing air of 6.2 bar and a passage of air of 170 l/m. This is best achieved with a 10-bar-compressor.
The construction stands out for its compact, robust design and its low tare weight of only 38.2 kg. This, and the comfortable handles, is why the plasma cutter can be easily transported. The air-cooled cutting unit has a powder-coated sheet steel casing. The plasma cutter has a 4.2 m ground cable. You can work on a large scale without being hindered by a short cable.
