TIG Welder - 225 A - 230 V - Pulse - 2/4 Stroke - SELECTION
529.00 Prices incl. VAT

TIG Welder - 225 A - 230 V - Pulse - 2/4 Stroke - SELECTION

Manufacturer: Stamos Selection | item number: EX10020037 | Model: S-WIGMA225PH / SPAWARKA

TIG Welder - 225 A - 230 V - Pulse - 2/4 Stroke - SELECTION
TIG Welder - 225 A - 230 V - Pulse - 2/4 Stroke - SELECTION
TIG Welder - 225 A - 230 V - Pulse - 2/4 Stroke - SELECTION
TIG Welder - 225 A - 230 V - Pulse - 2/4 Stroke - SELECTION
TIG Welder - 225 A - 230 V - Pulse - 2/4 Stroke - SELECTION
Play Video
360° photo
Tap to open gallery

Prices incl. VAT

  • Free shipment to Ireland


    Ready to ship today,
    Delivery time appr. 4-7 workdays

  • 30 days return service

  • 3 years guarantee

Product highlights

  • TIG DC / MMA
  • 225 A / 230 V
  • Pulse function / 2 - / 4-stroke
  • Hot start

The TIG welder S-WIGMA 225PH's control panel is clearly arranged and is easy to use while wearing welding gloves. Three toggle switches allow you to directly choose the basic welding functions (TIG, MMA, 2T, 4T, Pulse). You can set the required levels for power, pulse frequency, automatic down slope and gas post flow time using the five continuous control knobs. The large LED display lets you keep an eye on the current amperage.

Show more Show less

The welding machine has a maximum power of 225 amperes with a duty cycle of 60 percent. If the power is reduced to 174 amperes, you can weld without interruption. With its high performance, the welder can even weld thicker metals up to 9 mm quickly and precisely.

Show more Show less

The TIG DC welding method can be used for welding more robust metals such as steel, stainless steel, copper or brass. The torch produces few sparks and spatter and guarantees pure, high quality welds that leave very little distortion. In addition, you can use the welder in various positions, whether vertical, horizontal or overhead.

Show more Show less

For TIG welding, simply select the pulse frequency on the control panel, which will enable you to precisely weld thin sheets, among other things. You can select and set various parameters such as pulse frequency, current, pulse width and down-slop time using the control knobs. Even under difficult conditions, the arc can be easily stabilised since the pulse frequency is adjustable up to 200 Hz.

Show more Show less

The welder uses proven MOSFET inverter technology, which has an efficiency of 93% and guarantees a stable welding current for perfect welding seams. The welding arc is activated via reliable high-frequency ignition (HF).

Show more Show less

No additional gas is required for MMA (Manual Metal Arc) welding, enabling it to be used outdoors even in strong wind. With this welding method, the welder generates a very stable current, all the while securely maintaining the voltage. This allows you to make high-quality welds on a wide variety of metals.

Show more Show less

The MMA welding clamps can grasp even large electrodes with a diameter of up to 4 mm. With the MMA welding method, you can weld materials such as steel, iron, cast iron, nickel or copper from 1,5 to 4 mm thick. The welding machine enables you to correctly install and maintain railings, stairs, gates, doors, containers or metal machinery.

Show more Show less

The electrode welder's hot start function ensures an automatic and short-term increase of the welding current at the start of the welding process. Thanks to this “hot start”, the starting point is immediately heated to the optimal temperature and the electrodes do not clog. This creates a clean, stable weld from the very first moment.

Show more Show less

The air cooling system and overheat protection provide this device with long-lasting reliability and durability. The handle on the sturdy metal housing makes the device easy to transport. Because of its weight, we recommend a welding trolley for longer distances.

Show more Show less

  • Simple—easy operation via control knobs and rocker switches
  • Powerful—with a duty cycle of 60 % and 225 A
  • Versatile—adjustable values for gas post flow time, pulse frequency, down slop and pulse width
  • Proven—MOSFET technology with 2- / 4-stroke switch and HF ignition
  • Reliable—MMA welding with hot start

TIG Welder - 225 A - 230 V - Pulse - 2/4 Stroke - SELECTION

The S-WIGMA 225PH TIG DC welding machine from the Stamos Selection Series stands out for its high-quality workmanship and simple operation. For premium welding results, we use only flawless components which also meet professional requirements. The welding machine is enhanced by the option for electrode welding, so that you can use it flexibly according to your requirements on the construction site, in the workshop or in the private sector.

TIG DC / Pulse / MMA
Rated input voltage
230 V
50 Hz
Rated input current
17,4 A
Max. input current
24,6 A
Rated input power
3,8 kVA
Max. input power
5,4 kVA
Open circuit voltage
56 V
Ignition (TIG)
HF - high-frequency
Welding current TIG-DC
10 - 225 A
MMA welding current
10 - 225 A
Operating time / duty cycle
60 %
Welding current at 100 % duty cycle
225 A
Welding current at 60 % duty cycle
174 A
85 %
Pulse current
10 - 225 A
Pulse frequency
0,2 - 200 Hz
Pulse width
10 - 90 %
Down slope
0 - 5 s
Gas post-flow time
0 - 10 s
Diameter, electrode (TIG)
1 - 3,2 mm
Diameter, electrode (MMA)
1,6 - 4 mm
Welding strength (TIG)
1 - 8 mm
Welding strength (MMA)
1,5 - 9 mm
Hot start
2 - / 4-touch
Length of electrode holder with cable
3 m
Length, ground cable
3 m
Length, TIG cable assembly
3,8 m
Insulation class
Protection class
Device cooling
Torch cooling
Dimensions (LxWxH)
48 x 37 x 21 cm
12,7 kg
Shipping dimensions (LxWxH)
60 x 45 x 44,5 cm
Shipping weight
18,9 kg
Technical drawing
Delivery Package
  • Welding machine S-WIGMA 255PH
  • TIG cable assembly: 4 m
  • Grounding cable: 3 m
  • Electrode holder: 3 m
  • Tungsten electrode
  • 3 clamping sleeves (1.6 / 2.4 / 3.2 mm)
  • Clamping sleeve holder
  • 3 ceramic nozzles (5, 6, 7 mm)
  • Long torch cover
  • Instructions (German)

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Show moreShow less

Powerful fans ensure an optimal removal of heat from the unit.


TIG/MIG and MAG welding require a protective gas. Inert gases, such as argon and helium, as well as active gases (for example carbon dioxide) and other mixtures can be used. The solenoid valve regulates the flow of gas. The valve is operated via a button on the torch.

Show moreShow less

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².








This device works with a 1-phase connection (230 V +/- 10 %).


A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.




The time taken of the output welding current to lower to that of the terminal current.


This function reduces the heat to the material. It is primarily suitable for welding thin plates. If MIG welding is used, it is perfect for aluminium welding.


The frequency of impulses during pulse mode.


The maximum value of the electric current while in pulse mode.


The current which maintains the arc while in pulse mode.


Start the weld by placing pressure on the torch button. Stop the process by releasing the button.


By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

Show moreShow less

Through automatically boosting the tension at the ignition of the arc, this function facilitates the electrical arc ignition. After ignition, the unit automatically returns to the pre-set voltage.

Show moreShow less

The current value increases automatically when the arc is shorter.


This function helps to prevent overheating of the electrode by switching off the welding current when the electrode sticks to the material.


A welding method in which the arc is maintained through an electrical current supplied from a non-consumable electrode. The arc is protected from the access of air by an inert gas.

Show moreShow less

Electrode welding with a coated electrode.




Choose between the 2T and 4T mode.


Used to switch the pulse function on and off.


By using the SHIFT key the welding mode can be selected.


Shows the welding / cutting parameters.


The LED light indicates overheating or a malfunction.

The diverse assortment of products from Stamos enable you to cut or join materials efficiently and precisely. Our portfolio ranges from professional soldering stations to top-class welding machines and precise plasma cutters, to the matching accessories. Let us demonstrate to you the functionality, quality and versatility – not to mention the cost-effectiveness – of our professional line. Our videos show our products in action.

Do I have to prepare the workpiece for welding? And if so, how?

Chemical and flammable substances must be removed from the surface before welding as they can catch fire and release toxic substances.

How can I be sure that the accessories that are delivered with the welder are compatible?

When selecting the accessories, expondo places a strong emphasis on making sure that all components work perfectly together so that you can ensure the best possible welding results.

4.5 Based on 2 reviews

Sort by...

Leave a review
Evaluations will be activated after verification.

The fields marked with * are required.

Reviews from Amazon Customer (16 Sep 2018)
Reviews from Amazon Customer (16 Sep 2018) Poste à souder

Super poste à souder pour le moment ça marche bien

Reviews from Amazon Customer (17 Nov 2012)
Reviews from Amazon Customer (17 Nov 2012) Sehr gutes Gerät.

Sehr gutes Schweißgerät. Gut verarbeitet und robust. Alle Schalter und Drehknöpfe lassen sich gut bedienen und machen einen hochwertigen Eindruck. Alle Kabel und Schläuche sind ausreichend dimensioniert. Der Brenner ist auch von guter Qualität. Beide Schweißarten laufen mit diesem Gerät problemlos ab. Ich kann das Gerät nur empfehlen und es ist sein Geld Wert.

expondo expert

Still not sure?

Our experts are ready to help!
+44 20 376 988 02
Mon - Fri 09:30am - 04:30pm
TIG Spare Parts Set - Welding Tips up to 3.2 mm
Prices incl. VAT plus shipping costs
Schweißhelm – Firestarter 500 – ADVANCED SERIES - 2984 - 1
Prices incl. VAT plus shipping costs
This product
  • TIG DC / MMA
  • 225 A / 230 V
  • Pulse function / 2 - / 4-stroke
  • Hot start

Ready to ship today,
Delivery time appr. 4-7 workdays

TIG Welder - 225 A - 230 V - Pulse - 2/4 Stroke - SELECTION

TIG Welder - 225 A - 230 V - Pulse - 2/4 Stroke - SELECTION


Ready to ship today,
Delivery time appr. 4-7 workdays

  • TIG DC / MMA
  • 225 A / 230 V
  • Pulse function / 2 - / 4-stroke
  • Hot start
  • TIG DC / MMA
  • ECO
  • 200 A / 230 V
  • 2 - / 4-touch
  • Memory function

Ready to ship today,
Delivery time appr. 4-7 workdays

TIG Welder - 200 A - 230 V - pulse - digital - 2-/4-touch

TIG Welder - 200 A - 230 V - pulse - digital - 2-/4-touch


Ready to ship today,
Delivery time appr. 4-7 workdays

  • TIG DC / MMA
  • ECO
  • 200 A / 230 V
  • 2 - / 4-touch
  • Memory function