MIG/MAG Welder - 200 A - Synergic Pulse - MMA
859.00 Prices incl. VAT

MIG/MAG Welder - 200 A - Synergic Pulse - MMA

Manufacturer: welbach | item number: EX10021240 | Model: PROXUS 200DS

MIG/MAG Welder - 200 A - Synergic Pulse - MMA
MIG/MAG Welder - 200 A - Synergic Pulse - MMA
MIG/MAG Welder - 200 A - Synergic Pulse - MMA
MIG/MAG Welder - 200 A - Synergic Pulse - MMA
MIG/MAG Welder - 200 A - Synergic Pulse - MMA
MIG/MAG Welder - 200 A - Synergic Pulse - MMA
MIG/MAG Welder - 200 A - Synergic Pulse - MMA
360° photo
Tap to open gallery

Prices incl. VAT

  • Free shipment to Ireland


    Ready to ship today,
    Delivery time appr. 4-7 workdays

  • 30 days return service

  • 3 years guarantee

Ready for immediate shipping When ordering and making payment within the next 0 hours 49 mins , shipping will happen today.

Product highlights

  • MIG / MAG / MMA / FCAW / TIG lift-arc
  • 200 A welding current
  • Synergic pulse
  • Wire: Ø 0,6 - 1,2 mm
  • Hot Start / Anti-Stick

  • Powerful—200 A for MIG and TIG lift-arc and 170 A MMA as well as 100% duty cycle with 89 A (MIG)
  • Modern—IGBT-Inverter and convenient handling with a 2-clock to 4-clock switch
  • Digital—Synergic pulse for optimum and automatically tuned welding values as well as an LCD display
  • Flexible—wire spool with 200 mm diameter for wires of 0,8 to 1,2 mm
  • Precise—electrode welding with hot start and anti-stick

MIG/MAG welder with electrode welding

The MIG/MAG PROXUS 200DS welding machine works with a powerful IGBT inverter technology for maximum flexibility and quality. The infinitely variable regulation of the welding current up to 200 A ensures optimum weld seams for a wide variety of welding work, precisely matched welding values are obtained with the Synergic function. The MIG welding device can be used for electrode welding, which makes it easy to use even outdoors in winds. You can also use the TIG lift-arc function.

With Synergic Pulse, you automatically get optimum welding results

You always have complete control on the clear control panel with LCD display. There is a wide selection of pre-configured settings that you can use for optimal welding results. With Synergic Pulse, you only need to change one value with the push of a button and turn of a dial, the other values such as the wire speed, are automatically adjusted. You can determine and precisely set a 2-stroke or 4-stroke handling. It is equally easy to select the welding method between MIG/MAG, TIG lift-arc and MMA.

At full power, the MIG welding machine reaches 200 A, which can reliably handle even difficult repair and renovation work. If you reduce the welding current to 89 A, you can weld without interruption. A large coil with a diameter of 200 mm is available for the welding wire, so that you can also carry out longer work without renewing the wire. You can use thin or thick welding wires of 0,8 to 1,2 mm. If you want to weld without inert gas, you can also use a flux wire, since the inert gas is already integrated.

The shielding gas welding device has been designed for all metal work in production, workshops, locksmiths or crafts. MIG welding uses inert gases for copper, magnesium and other iron-free metals as well as their alloys; MAG welding with active gases is optimal for structural steel, steel and most of their alloys.

TIG welding with the PROXUS 200DS uses the high-frequency ignition to activate the arc. Compared to high-frequency ignition, the sensitive electronic devices which are located in the vicinity, for example mobile phones, computers or control systems, are not influenced or disturbed. The welding power of up to 200 A is easily controlled via the control panel.

Weld with one electrode without additional shielding gas and remain flexible

MMA welding is mainly used for iron or copper as well as alloys such as cast iron or steel. No gas is required for welding, so the device can also be used in adverse circumstances such as wind. The hot-start and anti-stick functions enable optimum welding results. The Hot-Start-function of the electrode welder procures an automatic and short-term increase of the welding current. The welding seam will be optimally heated. The ANTI-STICK function prevents overheating and the electrode sticking to the welding material by switching off the welding current.

The compact installation of the technical interior in a stable metal casing protects the device from mechanical damage. The device is cooled with a powerful fan. The efficient air circulation protects against overheating and contributes to the longevity of the device.

MIG/MAG, FCAW, MMA, TIG lift-arc
230 V
Rated input current
15,7 A (MIG), 15 A (MMA), 15,7 A (TIG)
Input current, max.
35,2 A (MIG), 33,5 A (MMA), 26,5 A (TIG)
Rated input power
2,76 kVA (MIG), 2,9 kVA (MMA), 2,9 kVA (TIG)
Input power, max.
8,1 kVA (MIG), 7,7 kVA (MMA), 6,1 kVA (TIG)
Open-circuit voltage
72 V
Welding current MIG
20 - 200 A
Welding current MMA (MMA) max.
170 A
Welding current TIG
10 - 200 A
Duty cycle (40 °C)
20 % (MIG), 20 % (MMA), 35 % (TIG)
Welding current with duty cycle 100 %
89 A (MIG), 76 A (MMA), 118 A (TIG)
Welding strength
Gas solenoid valve
Wire spool diameter
200 mm
Wire diameter
0,8 / 1,0 / 1,2 mm
Wire type
Hot Start
2-/4-step switch
Cable assembly length (MIG/MAG)
3 m
Length, electrode holder with cable
3 m
Length, ground cable
3 m
Length, power cable
2,5 m
Device cooling
Cooling distiller
Power factor
85 %
Casing material
Steel (Q235A)
Insulation class
Conformity to standards
Protection class
Dimensions (LxWxH)
51 x 18 x 38 cm
15,8 kg
Shipping dimensions (LxWxH)
63 x 31 x 46,5 cm
Shipping weight
17,6 kg
Delivery Package
  • MIG/MAG PROXUS 200 DS welder
  • MIG cable assembly with burner (3 m)
  • Ground cable (3 m)
  • Instruction manual

IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode. This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology.

Show moreShow less

Powerful fans ensure an optimal removal of heat from the unit.


TIG/MIG and MAG welding require a protective gas. Inert gases, such as argon and helium, as well as active gases (for example carbon dioxide) and other mixtures can be used. The solenoid valve regulates the flow of gas. The valve is operated via a button on the torch.

Show moreShow less

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².








This device works with a 1-phase connection (230 V +/- 10 %).




Start the weld by placing pressure on the torch button. Stop the process by releasing the button.


By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

Show moreShow less

Through automatically boosting the tension at the ignition of the arc, this function facilitates the electrical arc ignition. After ignition, the unit automatically returns to the pre-set voltage.

Show moreShow less

This function helps to prevent overheating of the electrode by switching off the welding current when the electrode sticks to the material.


Electrode welding with a coated electrode.


Welding with wire feed in a protective atmosphere.




Choose between the 2T and 4T mode.


By using the SHIFT key the welding mode can be selected.


Shows the welding / cutting parameters.

4 Based on 4 reviews

Sort by...

Leave a review (5 stars is highest, 1 is lowest)
Click on the link sent to your e-mail address and confirm your opinion! It will be published after verification.

The fields marked with * are required.

Reviews from Thomas E. (23 May 2022)
Reviews from Thomas E. (23 May 2022) Top Gerät!

Habe mittlerweile zwei von den Geräten im Einsatz. Die Pulsfunktion ist echt klasse. Benutze es für Stahl und Alu. Selbst als Hobbyschweißer gelingen damit fast alle Nähte auf Anhieb dank der syergischen Programme. Edelstahl werde ich in kürze noch probieren, wobei ich auch hier von super ergebnissen ausgehe. Von dünnen Blechen mit 1mm bishin zu 8mm starken trägern hab ich alles probiert und die ergebnisse sind echt spitze.

expondo experts reply 27 May 2022

Danke für Ihr positives und hilfreiches Feedback.


Wir freuen uns auf ein Wiedersehen. Bis bald und einen schönen Tag noch!

Reviews from Dirk (26 Mar 2022)
Reviews from Dirk (26 Mar 2022) Defekt

Leider defekt geliefert. Ein Drehknopf zählt nur abwärts, egal wie rum man dreht. So nicht benutzbar. Da hat die Qualitätssicherung geschlafen.

expondo experts reply 20 May 2022

Hallo Dirk,

vielen Dank für Ihr Feedback.

Hierfür bedanken wir uns, denn nur so können wir unsere Produkte weiter entwickeln und verbessern.

Sie haben Sie das fehlerhafte Produkt retourniert und es wurde erstattet. Anschließend haben Sie ein neues bestellt und mitgeteilt, dass dieses sowohl fehlerfrei als auch vollständig bei Ihnen eintraf.

Bitte lassen Sie uns wissen, ob nachwievor alles in Ordnung ist, oder ob wir in der Angelegenheit etwas für Sie tun können.

Sie erreichen uns unter [email protected]

Ihr expondo-Team


Reviews from Gerhard E. (14 Jan 2022)
Reviews from Gerhard E. (14 Jan 2022) Da macht Schweißen Spaß

Ein Schweiß gerät das handlich ist und eine hervorragende Leistung hat. Mit der Impulstechnik schweißt es traumhafte Nähte .ohne viel zu spritzen . Man kann Stahl..V2A.V4A.und Alu Schweißen . Die Möglichkeiten sind alle perfekt einzustellen .
Andere Geräte in der Klasse kosten 2500€.
Einfach ein Traum. Danke

Reviews from Antonio (14 Dec 2021)
Reviews from Antonio (14 Dec 2021) Alles SUPER

Unschlagbar zu dem Preis. Schweißt perfekt, auch Alu mit Puls. Bin begeister! Schnelle Lieferung.

expondo expert

Still not sure?

Our experts are ready to help!
+44 20 376 988 02
Mon - Fri 09:00am - 04:00pm
This product
  • MIG / MAG / MMA / FCAW / TIG lift-arc
  • 200 A welding current
  • Synergic pulse
  • Wire: Ø 0,6 - 1,2 mm
  • Hot Start / Anti-Stick

Ready to ship today,
Delivery time appr. 4-7 workdays

MIG/MAG Welder - 200 A - Synergic Pulse - MMA

MIG/MAG Welder - 200 A - Synergic Pulse - MMA


Ready to ship today,
Delivery time appr. 4-7 workdays

  • MIG / MAG / MMA / FCAW / TIG lift-arc
  • 200 A welding current
  • Synergic pulse
  • Wire: Ø 0,6 - 1,2 mm
  • Hot Start / Anti-Stick