Gasless MIG/MAG Welder - 90 A
169.00 Prices incl. VAT 219.00€

Gasless MIG/MAG Welder - 90 A

Manufacturer: Stamos Power ² | item number: EX10020151 | Model: S-MIG 100

Gasless MIG/MAG Welder - 90 A
Gasless MIG/MAG Welder - 90 A
Gasless MIG/MAG Welder - 90 A
Gasless MIG/MAG Welder - 90 A
360° photo
Tap to open gallery
Instead of: 219.00€   You save 50.00€   169.00 Instead of: 219.00€  

Prices incl. VAT

  • Free shipment to Ireland

    ?

    Ready to ship today,
    Delivery time appr. 4-7 workdays

  • 30 days return service

    ?
  • 3 years guarantee

Ready for immediate shipping When ordering and making payment within the next 0 hours 24 mins , shipping will happen today.

Product highlights

  • FCAW
  • 230V / 50Hz
  • Welding current 90 A
  • Filler wire (Flux) included
  • Overload protection

  • Practical FCAW welding machine for smaller metal work
  • Compact design
  • Mobile use
  • May be used outdoors
  • requires only cored wire as consumable material
  • including Flux cored wire roll (0,8 mm, 0,23 kg)
  • Ideal for medium to light alloy steel, stainless steel, cast iron, nickel alloys
  • Less welding defects than other SMAW or GMAW processes
  • Precise control of the feed
  • Easy to use

The S-MIG 100 filler wire welding machine from Stamos Power is versatile device which specialises in smaller welding tasks such as those within the home, in the garden or the workshop. It is easy to handle, compact in design and low in weight, so it very mobile, which is helped even further with the carry handle. A roll of filler wire (0.8mm, 23kg) is included, allowing you start welding immediately.

With FCAW welding, the weld seam is produced using a filler wire, without the need for additional protection gas. This makes the device very practical, allows welding from different positions and can also be used outdoors. It is suitable for a wide range of small metal work, for example basic welding repairs for your car.

The filler wire is fed to the burner via the built-in wire feed. The feed speed can be adjusted via a controller so that precise welding results can be achieved. During welding, the welding machine is automatically air-cooled with a fan.

The welding machine is ideally suited for materials such as medium to light alloy steel, cast iron or nickel alloy. The weld seam shows fewer defects than other SMAW or GMAW processes. After welding, the resulting slag is easily dissolved.

The operation is very simple with few controllers and requires only a little knowledge and experience to use. In addition to an on / off switch, the current level and the wire feed can be adjusted. The filler wire electrode is the only consumable material of the device, which must be replaced if necessary. Excessive heat generation during the welding process is prevented due to an overheating protection system.

Model
S-MIG 100
Condition
New
Rated input voltage
230 V
Input frequency
50 Hz
Wire feed
Internal
Welding voltage
17,3 – 18,5 V
Welding current
65 – 90 A
Duty cycle
20 %
Length of ground cable
1,8 m
Length of the cable
1,7 m
Diameter of the welding wire
0,6 – 0,8 mm
Wire type
Filler wire (Flux)
Wire diameter
0,8 – 0,9 mm
Length power cable
2 m
Dimensions (LxWxH)
37 x 20,5 x 31 cm
Weight
16,58 kg
Shipping dimensions (LxWxH)
53,7 x 35,3 x 37,7 cm
Shipping weight
20,22 kg
Technical drawing
Delivery Package
  • S-MIG 100 welding device
  • FCAW burner, cable length (1.7 m)
  • Including Flux cored wire roll (0,8 mm, 0,23 kg)
  • Ground cable with terminal (1.8 m)
  • Power cable (2 m)
  • Welding face mask
  • Handle for the welding machine
  • Handle for face mask
  • Operation manual
 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
GROUND TERMINAL CONNECTOR

 

 
MIG/MAG TORCH CONNECTOR

 

 
SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

 
POWER SWITCH

 

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

Write the first review for this product



Leave a review (5 stars is highest, 1 is lowest)
Click on the link sent to your e-mail address and confirm your opinion! It will be published after verification.

The fields marked with * are required.

expondo expert

Still not sure?

Our experts are ready to help!
+44 20 376 988 02
Mon - Fri 09:00am - 04:00pm
MIG Spare Parts Set - S-MIG 190P / S-MIG 250P
65.00€
Prices incl. VAT plus shipping costs
Welding Cart - 3 levels - 65 kg
159.00€
Prices incl. VAT plus shipping costs
This product
  • FCAW
  • 230V / 50Hz
  • Welding current 90 A
  • Filler wire (Flux) included
  • Overload protection

Ready to ship today,
Delivery time appr. 4-7 workdays

Gasless MIG/MAG Welder - 90 A

Gasless MIG/MAG Welder - 90 A

Instead of: 219.00€   169.00€  

Ready to ship today,
Delivery time appr. 4-7 workdays

  • FCAW
  • 230V / 50Hz
  • Welding current 90 A
  • Filler wire (Flux) included
  • Overload protection
  • MIG / MAG / MMA / FCAW
  • 230V / 50Hz
  • Welding current up to 155 A
  • Full wire / core wire (Flux)
  • Overload protection

Ready to ship today,
Delivery time appr. 4-7 workdays

Combined welding machine - 155 A - 230 V - portable

Combined welding machine - 155 A - 230 V - portable

(6)
269.00€  

Ready to ship today,
Delivery time appr. 4-7 workdays

  • MIG / MAG / MMA / FCAW
  • 230V / 50Hz
  • Welding current up to 155 A
  • Full wire / core wire (Flux)
  • Overload protection
  • MIG / MAG / MMA / FCAW
  • 230V / 50Hz
  • Welding current up to 195 A
  • Full wire / core wire (Flux)
  • Overload protection

Ready to ship today,
Delivery time appr. 4-7 workdays

Combined Welder - 195 A - 230 V - with cart

Combined Welder - 195 A - 230 V - with cart

(8)
439.00€  

Ready to ship today,
Delivery time appr. 4-7 workdays

  • MIG / MAG / MMA / FCAW
  • 230V / 50Hz
  • Welding current up to 195 A
  • Full wire / core wire (Flux)
  • Overload protection