MIG/MAG Gasless Welder - 120 A

205.⁰⁰€ Prices incl. VAT plus shipping costs*

(1)

360° photo

205.⁰⁰€

Prices incl. VAT plus shipping costs*

Free shipment to Ireland
?

Ready to ship today,
Delivery time appr. 4-6 workdays
30 days return service
?
3 years guarantee

Product Highlights

FCAW
120 A / 230 V
Wire diameter: 0.8 / 0.9 mm
Spool diameter: 100 mm
Transformer

More flexibility for welding without shielding gas

The control panel of the FCAW (flux-cored arc welding) device is very user-friendly, making it easy to operate. As with many MIG/MAG welders, the wire feeder is operated using a continuously adjustable dial with which you can set the speed to between 1 and 10, according to your needs. You can turn on the device and specify the desired current up to 120 amperes using 3 toggle switches.

Show moreShow less

The flux core welder is extremely compact. All of the cables are integrated into the device and can be used immediately. The spool for the flux-cored wire is mounted inside the housing and the wire is fed to the torch from there. The wire used should have a diameter of 0.8 or 0.9 millimetres.

Show moreShow less

The housing is equipped with a handle, making the welder especially easy to carry for mobile use. Because there is no shielding gas required, you can also use the transformer-based machine outdoors, even in windy conditions.

Show moreShow less

The flux welder has a powerful fan for optimally regulating the operating temperature. However, if the device does get too hot, the overheat protection ensures the required safety during operation.

Show moreShow less

Highlights

More mobility thanks to flux-cored arc welding without shielding gas
Current can be regulated in four levels up to 120 A
Integrated wire feeder for rolls up to 100 mm
Precisely adjust wire speed using dial
Portable - compact design and handle for use outdoors

MIG/MAG Gasless Welder - 120 A

The flux core welder S-MAG 120 FL works similarly to a MIG/MAG welder but has the advantage of not requiring a gas cylinder for welding, as the shielding gas is contained inside the flux-cored wire. This makes the flux welder more flexible and mobile for use in welding work in skilled trades, metalworking shops or in production. The gasless welder is also a practical solution for those times when you need to do some precise welding in your automobile workshop or during repair work.

Model

S-MAG 120 FL

Item number

10021048

Condition

New

Rated input voltage

230 V

Input frequency

50 Hz

Wire type

Cored wire (flux)

Wire feeder

Internal

Wire speed

0 - 10

Diameter, wire spool

100 mm

Diameter, wire

0,8 - 0,9 mm

Max. input current

21,6 A

Max. input power

4,9 kVA

Welding current

40 - 120 A

Duty cycle

10 %

Welding current at 100 %

40 A

Welding current at 60 %

60 A

Welding current at 10 %

120 A

Power factor

0.96

Length, ground cable

2 m

Length, torch cable

1,7 m

Length, power cable

1,9 m

Cooling system

Fan

Protection class

IP21

Dimensions (LxWxH)

44 x 21,5 x 32 cm

Weight

17,9 kg

Shipping dimensions (LxWxH)

54 x 35,5 x 37 cm

Shipping weight

21,2 kg

Delivery Package

Gasless welder S-MAG 120 FL
2 M5 30 mm screws
2 M5 nuts
MIG nozzle
3 MIG contact tips (0.8 / 0.8 / 0.9 mm)
Gas diffuser
Instruction manual

VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

GROUND TERMINAL CONNECTOR

MIG/MAG TORCH CONNECTOR

POWER SWITCH

OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

What is the maximum size of the wire spool?

The wire spool is mounted in the integrated wire feeder and should not exceed a diameter of 10 centimetres.

What is the maximum thickness of the wire?

The wire should not be more than 0.9 millimetres in diameter, although you can also use a flux-cored wire with a diameter of 0.8 millimetres.

5 Based on 1 reviews

_{Sort by...}

Leave a review ★ ★ ★ ★ ★

Evaluations will be activated after verification.

Reviews from RISSO (27 Feb 2020)

Reviews from RISSO (27 Feb 2020) Bonjour, poste "no gaz" arrivé dans les délais (4 jours) ! Pas encore servi car pas de fil fourré à dispo. Matériel conforme dans l'ensemble (juste une inversion dans les buses de contact 0,9x2 et 0,8 au lieu de 0,8x2 et 0,9 qui étaient prévues. Par contr

Content du délai tenu !Mais, je reste réservé quand au bon fonctionnement du poste car la torche a été placée sous celui-ci (env 18kg) lors des 3 jours du transport !!! problème : comme la torche n'est pas démontable, si elle est"HS" le poste sera inutilisable !!! Je vous tiendrai au courrant bien entendu !

expondo experts reply 23 Mar 2020

Bonjour Monsieur Risso,

Nous avons essayé de vous joindre à plusieurs reprises, malheureusement sans succès. Afin que nous puissions trouver une solution adaptée pour vous, je vous prierais s'il vous plaît de nous contacter par téléphone du lundi au vendredi de 08:00 à 16:00 au 09 72 35 50 85 ou bien par e-mail à [email protected].

Cordialement,
expondo Customer Care