MIG/MAG Welder - 250 A - digital - MMA

MIG/MAG welder with electrode welding

The MIG/MAG PROXUS 250C welding machine works with a powerful IGBT inverter technology for maximum flexibility and quality. The seamless regulation of the welding current up to 250 A ensures optimum weld seams for a wide variety of welding work. The MIG welding device can be used for electrode welding, which makes it easy to use even outdoors in winds.

Clear function selection with digital control panel

Rotary controls as well as two LED displays control all values such as current or voltage simply as directly. You can determine and precisely set a 2-stroke or 4-stroke handling. It is equally easy to select the welding method between MIG/MAG, TIG lift-arc and MMA.

At full power, the MIG welding machine reaches 250 A, which can reliably handle even difficult repair and renovation work. If you reduce the welding current to 158 A, you can weld without interruption. A large coil with a diameter of 300 mm is available for the welding so that you can also carry out longer work without renewing the wire. You can use thin or thick welding wires of 0,6 to 1,2 mm.

The shielding gas welding device has been designed for all metal work in production, workshops, locksmiths or crafts. MIG welding uses inert gases for copper, magnesium and other iron-free metals as well as their alloys; MAG welding with active gases is optimal for structural steel, steel and most of their alloys. If you want to weld without inert gas, you can also use a flux wire, since the inert gas is already integrated.

With the additional WIG welding torch with an external gas connection (not included in delivery), this welder can also be used for TIG welding with lift-arc ignition. All you have to do is select the corresponding function on the control panel.

WIG welding can be used when particularly clean welds are needed. There are hardly any impurities and the welds are always straight and sharp. There are no slags, so cleaning is not required. Sparks, splashes and open flames are kept to a minimum.

The compact installation of the technical interior in a stable metal casing protects the device from mechanical damage. The device is cooled with a powerful fan. The efficient air circulation protects against overheating and contributes to the longevity of the device.

Weld with one electrode without additional shielding gas and remain flexible

MMA welding is mainly used for iron or copper as well as alloys such as cast iron or steel. No gas is required for welding, so the device can also be used in adverse circumstances such as wind. The hot-start and anti-stick functions enable optimum welding results. The Hot-Start-function of the electrode welder procures an automatic and short-term increase of the welding current. The welding seam will be optimally heated. The Anti-Stick function prevents overheating and the electrode sticking to the welding material by switching off the welding current.