3-in-1 Combo Sheet Metal Roller - 305 mm

3-in-1 Combo Sheet Metal Roller - 305 mm

The 3-in-1 combo sheet metal roller MSW-MFM-3IN1-305 reliably processes sheet metal that needs to be curved, bent or sheared. The roller press can shape a variety of metals including steel, aluminium, copper and brass into cylinders or pipes. The machine also has integrated dies for stamping folds and, if needed, cutting metal sheets and rods.

The sheet metal roller from MSW has three steel rollers. By cranking the machine, you can pull and bend metal sheets and rods up to 1 mm thick. The rollers have grooves on the sides with diameters of 2.4, 3.2 and 5.16 mm for bending rods.

You can adjust the distance and angle between the rollers depending on the material thickness and the desired curvature. The maximum width of the metal sheet should not exceed 305 mm. The sheet metal roller is suited for a variety of uses, including forming curves, cylinders or tubes. You can also use the machine to straighten sheet metal if needed.

In addition, the device is equipped with two dies that can be used for creating brakes or shearing metal. Bending a brake creates a 90° angle in the metal sheet. The device allows you to adjust the location of the bend. The device also has an adjustable stop for making multiple identical cuts.

The 3-in-1 combo device can be securely mounted to a workstation with screws. The sheet metal roller's sturdy steel construction is ideal for metalworking. The upper roller can be loosened and removed with just a few motions, making maintenance a breeze and also making it easier to remove finished metal sheets.