Plasma Cutter - 70 A - 400 V - pilot arc
509.00

Plasma Cutter - 70 A - 400 V - pilot arc

Manufacturer: Stamos Power ² | item number: EX10020128 | Model: S-CUTTER 70-3PH

Plasma Cutter - 70 A - 400 V - pilot arc
Plasma Cutter - 70 A - 400 V - pilot arc
Plasma Cutter - 70 A - 400 V - pilot arc
Plasma Cutter - 70 A - 400 V - pilot arc
Plasma Cutter - 70 A - 400 V - pilot arc
Plasma Cutter - 70 A - 400 V - pilot arc
Play Video
360° photo
509.00

Prices incl. VAT plus shipping costs*

  • Free shipment to Ireland

    ?

    Ready to ship today,
    Delivery time appr. 4-6 workdays

  • 30 days return service

    ?

Ready for immediate shipping When ordering and making payment within the next 11 hours 58 mins , shipping will happen today.

Product Highlights

  • Cutting current: 20 - 70 A
  • Cutting capacity up to 20 mm
  • Pilot arc
  • LED display
  • 400 V

S-Cutter 70-3PH—high efficiency thanks to proven V-MOSFET inverter technology

 

With a duty cycle of 60 percent, the basic unit of the plasma cutter delivers a cutting current of 70 amperes. At 100 percent duty cycle, it delivers 52.4 amperes. The cutting current can be continuously varied between 20 and 70 amperes on the control unit. This covers the entire performance range, which enables the cutting of low- and high-alloy steels as well as aluminium, copper, titanium and other non-ferrous metals.

Show moreShow less
 

The LED display and the rest of the control unit provide an overview of the performance values. Both the cutting current and the air pressure can be preselected precisely and steplessly via rotary knobs. In this way, the optimum performance values can be set for every area of application. Depending on the metal, the plasma cutter can reach a cutting depth of up to 20 mm.

Show moreShow less
 

You can connect an external compressor via the included compressed air hose. The required working pressure is 4 to 5 bar at an air flow rate of 235 litres per minute. You can set the air pressure values using the integrated pressure reducer on the easy-to-read control unit and check them on the dial gauge.

Show moreShow less
 

The 5 metre-long plasma hose and 3 metre-long grounding cable ensure plenty of freedom of movement. The ergonomic torch with P31 Softgrip coating ensures comfortable operation and fatigue-free work. The pilot arc can be started directly at the cutting torch via high frequency.

Show moreShow less
 

Whether in an extensive renovation or in industrial production, metal work is often a rugged affair and the tools and machines used must be correspondingly robust. For this reason, the power unit of the cutter is housed in a coated sheet steel housing, which guarantees both functional efficiency under difficult working conditions and a long service life.

Show moreShow less
 

The base unit is fitted with a powerful fan for cooling to prevent any problems from overheating. However, if the operating temperature does experience a sudden, unwanted increase, it will trigger the overheat protection. This guarantees that the operating temperature is maintained and that the device has a long service life.

Show moreShow less

Note: High voltage current connector not included in delivery.

Highlights

  • 60 percent duty cycle at 70 A
  • Easy-to-read LED display for precision and reproducible results
  • Ergonomic torch with P31 Softgrip coating
  • Integrated pressure reducer with pressure gauge
  • Robust and durable thanks to coated sheet steel housing
  • Maximum power yield through V-MOSFET inverter technology with 93 percent efficiency

Plasma Cutter - 70 A - 400 V - pilot arc

The S-Cutter 70-3HP plasma cutter from Stamos Power offers energetic support when cutting metallic materials. It is equipped with powerful V-MOSFET inverter technology and performs a wide variety of tasks in automotive workshops, metal processing companies and in industrial production. In the DIY sector, it supports ambitious DIY enthusiasts in their repair and renovation projects.

Model
S-Cutter 70-3PH
Item number
10020128
Condition
New
Input voltage
400 V / 3 phases
Input frequency
50 Hz
Function
Plasma cutting
Rated input current
10,6 A
Max. input current
13,8 A
Rated input power
6,8 kVA
Max. input power
9 kVA
Load-free voltage
251 V
Cutting current
20 - 70 A
Operating time (duty cycle)
60 %
Cutting current at 100 percent duty cycle
52,4 A
Cutting current at 60 percent duty cycle
70 A
Cutting torch (Ø connection)
P 60 (16 mm)
Housing cooling
Fan
Torch cooling
Air
Ignition
High frequency
Length, grounding cable
3 m
Length, plasma cable
5 m
Length, power cord
2 m
Max. cutting depth
20 mm
Cutting width
1,2 mm
Air flow rate
235 L/min
Required air pressure
4 - 5 bar
Insulation class
F
Protection class
IP21
Efficiency
>= 0.85
Power factor
0.93
Dimensions (LxWxH)
48 x 20 x 35 cm
Weight
14 kg
Shipping dimensions (LxWxH)
60 x 28 x 48 cm
Shipping weight
20,9 kg
Technical drawing
Delivery Package
  • S-CUTTER 70 3PH
  • Ground cable with clamp
  • Professional cable assembly
  • Air hose
  • Accessory bag
  • Cover
  • Instruction manual
 
MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Show moreShow less
 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

Show moreShow less
 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
CUTTING TORCH CONNECTION

 

 
SUPPLY VOLTAGE

This device works with a 3-phase connection (400 V +/- 10 %).

 
WELDING CURRENT

 

 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

 
POWER SWITCH

 

 
DISPLAY

Shows the welding / cutting parameters.

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

 
LOSS OF PHASE LED

The LED lights to indicate that the network connection of the phase has failed.

 
PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.

The following accessoires can be used for the Plasma Cutter S-CUTTER 70 3PH by Stamos Power:

Art. No.
Article
2137
Plasma Spare Parts Set - S-CUTTER 70

The diverse assortment of products from Stamos enable you to cut or join materials efficiently and precisely. Our portfolio ranges from professional soldering stations to top-class welding machines and precise plasma cutters, to the matching accessories. Let us demonstrate to you the functionality, quality and versatility – not to mention the cost-effectiveness – of our professional line. Our videos show our products in action.

What's the maximum thickness of a material the plasma cutter can cut through?

The maximum thickness is 20 mm.

Is the plasma cutter easy to transport?

Yes, thanks to its compact size and relatively light weight of 14 kg, the device can be carried without too much effort.

How does the device inform me when it's threatening to overheat?

A diode lights up as soon as the maximum duty cycle is exceeded and the device heats up too much as a result. The light will also warn you if the plasma cutter generates too much heat due to malfunction. In both cases, the operation should be interrupted.

5 Based on 1 reviews

Sort by...

Leave a review
Evaluations will be activated after verification.

The fields marked with * are required.

Reviews from Amazon Customer (29 Nov 2018)
Reviews from Amazon Customer (29 Nov 2018) ptencia

el que sea trifasico

Gesamtansicht von Plasma Ersatzteilset - S-CUTTER 70
69.00€
Prices incl. VAT plus shipping costs
Schweißhelm – Carbonic – PROFESSIONAL SERIES - 2987 - 1
Instead of: 105.00€
92.00€
Prices incl. VAT plus shipping costs
This product
  • Cutting current: 20 - 70 A
  • Cutting capacity up to 20 mm
  • Pilot arc
  • LED display
  • 400 V

Ready to ship today,
Delivery time appr. 4-6 workdays

Plasma Cutter - 70 A - 400 V - pilot arc

Plasma Cutter - 70 A - 400 V - pilot arc

(1)
509.00€  

Ready to ship today,
Delivery time appr. 4-6 workdays

  • Cutting current: 20 - 70 A
  • Cutting capacity up to 20 mm
  • Pilot arc
  • LED display
  • 400 V
  • High cutting speed
  • PRO Series - Cable: 8 m
  • Cutting current: 20 – 60 A
  • Power ventilator
  • 400 V high voltage current

Ready to ship today,
Delivery time appr. 4-6 workdays

Plasma Cutter - 60 A - 400 V

Plasma Cutter - 60 A - 400 V

Instead of: 629.00€   503.00€  

Ready to ship today,
Delivery time appr. 4-6 workdays

  • High cutting speed
  • PRO Series - Cable: 8 m
  • Cutting current: 20 – 60 A
  • Power ventilator
  • 400 V high voltage current
  • High cutting speed
  • PRO Series - Cable: 8 m
  • Cutting current: 20 – 80 A
  • Power ventilator
  • 400 V high voltage current

Ready to ship today,
Delivery time appr. 4-6 workdays

Plasma Cutter - 80 A - 400 V

Plasma Cutter - 80 A - 400 V

(1)
635.00€  

Ready to ship today,
Delivery time appr. 4-6 workdays

  • High cutting speed
  • PRO Series - Cable: 8 m
  • Cutting current: 20 – 80 A
  • Power ventilator
  • 400 V high voltage current
  • Cutting current: 20 - 85 A
  • Cutting depth up to 27 mm
  • Pilot arc
  • 2 T / 4 T switch
  • 400 V

Ready to ship today,
Delivery time appr. 4-6 workdays

Plasma Cutter - 85 A - 400 V - pilot arc

Plasma Cutter - 85 A - 400 V - pilot arc

(3)
739.00€  

Ready to ship today,
Delivery time appr. 4-6 workdays

  • Cutting current: 20 - 85 A
  • Cutting depth up to 27 mm
  • Pilot arc
  • 2 T / 4 T switch
  • 400 V