Price very good. Use for car care and also in the garden.

Excellent quality/price ratio, used with a 1000lt compressor it is super effective

I would like to buy this product for furniture wooden chairs what power for the compressor and the grain for the sand.....never done thank you

Fulfills its purpose, was very surprised by it. A recommended device.

Everything is very good. All you need is a strong compressor.

I have an identical device, there are different suppliers but it is almost the same product. It has to be said that if you have a compressor with too little steam on the chain, it is impossible to work properly. 300-400l air/min are required. It's best to double it straight away. In my case, the handle at the front of the nozzle closure wore out extremely quickly. Finding the right attitude is very important. It only knows positions 0 and 1, which leads to a rapid loss of pressure if the compressor is too small. After the closure was over, I thought it would be good to have a ball valve in front of it and you can regulate it better. This also worked until the brass wall of the ball valve was sanded through at the predetermined breaking point. Zack, not possible to work again. It drove me crazy, so I ordered stainless steel ball valves and hoped that this would give me a longer service life. The nozzles are also only available up to 3.5mm. Simply too small for some blasting materials. Alternative nozzles cannot be used as they are usually longer than 21mm. At least as far as plug and play is concerned. One star deducted for the hat. It scratches the first time you use it and you can only see little to nothing, it gets dusty from the inside and it slips back and forth. If you're wearing hearing protection, it's more annoying than anything else, and afterwards you could feel the blasting agent everywhere. Wear a breathing mask and additional dust-proof safety glasses. In any case, the thing is unnecessary and only included for the sake of good will. Another point of criticism is the pre-assembled hose clamps. The hose twists on the mixing valve and the handle even when they are closed. It then even blocks the tap at the mixing valve. I swapped these clamps for normal hose clamps. Otherwise, I think these systems are quite good and well thought out. Once you find the right settings, it works really well in the hobby sector. A longer hose would be desirable. You just have to buy it again

The delivery was quick and problem-free. The construction was easy. However, how it works needs to be described. The foot valve at the bottom of the container made an audible crunch after filling and opening the valve! The blasting material often clogged the valve and also the blasting hose. I'll try it with a different blasting material.

With a good compressor I sandblasted the ceiling beams

After a few tests and adjustments, perfect sandblasting of metal objects