Are you looking for a sturdily constructed and reliable trolley for your warehouse? Then we have the right solution for you - the inexpensive PROCAT 300 trolley with electric cable from MSW. The professional trolley was developed for professional workers and is particularly suitable for large warehouses or closed spaces, but also outdoors.
The hoist has a 12 m stable steel rope with a pulling force of 150 kg. With the pulley, the traction force doubles to 300 kg. You can transport various heavy objects from one storage place to the next without any problems.
When inserting the pulley, the lifting height is reduced by half to 4 m and the lifting speed goes to 4 m/min from the previous 8 m/min. The lowering speed is 8 m/min and halved to 4 m / min when using the pulley. Due to the load hook, the load is always fixed to the 3 mm thick steel cable. The solid CK45 steel cable, which is not susceptible to torsion, is wear-resistant and extremely durable. The overload protection guarantees that the trolley works reliably and efficiently for a long time, and the 550 watt engine will not overheat.
The sliding chassis of the trolley allows you to move it through a curvy territory as long as the turn radius is at least 1 m. An electromagnetic braking system ensures quiet operation and holds the load without effort.
The cable is controlled by a cable remote control, which has a length of 1.45 m for a more comfortable operation. Another highlight is the attached strain relief, which ensures that you can safely work with your trolley at any time. The cable of the remote control is spared, which further increases the already long service life
The trolley PROCAT 300 is mounted onto a steel girder with a width of 68 - 94 mm and a height of at least 110 mm. You can use a wide flange, I-beam or double T-beam for a steel profile. The high-quality trolley from MSW removes all obstacles for the transportation of large goods.
Block with a hook
Crane electric motor - Power [W]
Crane electric motor - Protection class
Crane electric motor - Intermittent duty
S3 20 % - 10 min
Crane electric motor - Isolation
Electric motor - Intermittent duty
S3 20 % - 10 min
Electric motor - Isolation
Electric motor - Power [W]
Electric motor - Protection class
Lifting speed - single draft [m/min]
Lowering speed- deflection roller [m/min]
Lifting performance - single draft [kg]
Lifting speed- deflection roller [m/min]
Lowering speed - single draft [m/min]
Lifting performance - deflection roller [kg]
Material of gear wheels
Max lifting height - deflection roller [m]
Max lifting height - single draft [m]
Power cord [m]
Rope length [m]
Rope diameter [mm]
Minimum radius of the curve [m]
Remote cable [m]
Steel CK 45
Type of grease
Traverse speed [m/min]
Tensile strength of rope [N/mm2]
42 x 37.5 x 34 cm
Shipping dimensions (LxWxH)
49.3 x 41 x 48 cm
FREQUENTLY ASKED QUESTIONS
How long is the cable for the remote control?
The cable is 1.45 cm long.
Do I have to use the pulley?
No, you don’t need to use the pulley. If you do use the pulley, the traction increases to 300 kg.
How long does it take until the overload protection of the trolley comes on?
The engine of the electrical winch has a S3-20% 10 minutes system. One duty cycle takes 10 minutes. The device runs for two minutes and rests for eight minutes. It doesn’t have a continuous operation.