
Welding Set CNC Plasma Cutter - 85 A - 400 V - Pilot Ignition + Welding helmet –Pokerface - PROFESSIONAL SERIES
Manufacturer: Stamos Germany | item number: EX18000199 | Model:
- Adjustable helmet
- Visor-face distance adjustable
- Light protection DIN 4 – 8 or DIN 9 - 13
- 100 x 65 mm field of view
- Viewing angle adjustable
- Light protection for all common welding processes
- Delay time (0.25 - 0,8 s)
- Switching time 1 / 30,000 s
Welding Set CNC Plasma Cutter - 85 A - 400 V - Pilot Ignition + Welding helmet –Pokerface - PROFESSIONAL SERIES
Welder
The plasma cutter S-PLASMA 85CNC by Stamos Germany was conceived for professional use at CNC machines manual, but it is also suitable for manual operation. This device has a 380 volt power current connection with 3 phases. The plasma cutter S-PLASMA 85CNC captivates through numerous distinguishing features such as powder-coated steel iron housing, a high economic efficiency and a first-class cutting quality. Due to a thermal overload protection you are always on the safe side when cutting. This also guarantees a high level of safety and maximum reliability. The plasma cutter works with an adjustable cutting current in the range of 20 to 75 amps. Therefore, you can easily cut materials with a thickness of up 27 mm. The plasma cutter S-PLASMA 85 CNC by Stamos Germany uses the state-of-the-art bipolar transistor technology (IGBT). This ensures a high robustness against short-circuits since IGBT limits the load current.
Another advantage is the fine and clean cut of the plasma cutter S-PLASMA 85 CNC by Stamos Germany. You can cut everything – from thin sheet metals up to steel plates! Thanks to high cutting speeds and “fast start function”, split cuts and quality cuts are no problem. The professional plasma cutter S-PLASMA 85 CNC offers a multitude of qualities and outstanding characteristics which provide a perfect utilisation in various fields of applications.
Anti-Interference-Function:
With most manufacturers there are problems with high frequency interference when it comes to CNC plasma cutters. The high-frequency high pressure arc produces an unavoidable interference. In order to exclude this interference and to ensure proper usage and governance of the device the CNC plasma cutter S-PLASMA 85 CNC by Stamos Germany features the latest technology in avoidance of any interference whatsoever. Due to the advanced interior construction of the CNC plasma cutter disturbances are avoided or reduced. For that reason, the plasma cutter is especially convincing in combination with a CNC machine and therefore forms a perfect synergy. Even minor interferences in the system can seriously compromise longevity and functionality. Buy the professional plasma cutter by Stamos Germany today! With products from Stamos Germany you are always on the safe side – both now and in the future.
+
Welding helmet
The Pokerface welding helmet by the Professional Series from Stamos Germany - the best choice for professional and hobby welders
The automatic Pokerface welding helmet from the Professional Series from Stamos Germany is characterized by its light weight and good response speed. The welding helmet is extremely versatile and can be used within all common welding processes (MIG welding, MAG / CO2 welding, manual welding, TIG welding, plasma cutting and micro plasma cutting).
In addition, the automatic welding helmet Pokerface is known for its long-lasting visibility (cartridges). The cartridges are powered by solar cells and a CR2450 battery. The welding helmet works with a particularly wide range of light protection, which can be flexibly adjusted from DIN 4 - 8 or from DIN 9 - 13. The size of the screen is an extraordinary 100 x 65 mm. In this way, you can always keep an overview of all the essential details.
- S-Plasma 85CNC
- plasma hose package: 5 m
- air hose: 4 m
- ground cable: 3 m
- 5 cutting nozzles
- 5 electrodes for plasma
- manometer
- pressure regulator
- instruction manual
- Welding helmet "Pokerface"
- Instruction manual
IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode. This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology.
Show moreShow lessPowerful fans ensure an optimal removal of heat from the unit.
For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.
Show moreShow lessOn the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².
This device works with a 3-phase connection (400 V +/- 10 %).
The CNC connector is designed to connect the plasma cutter to CNC controls. Once connected, it will signal the THC module, which controls the height of the burner.
The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.
Start the weld by placing pressure on the torch button. Stop the process by releasing the button.
By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.
Show moreShow lessThe plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.
Choose between the 2T and 4T mode.
Shows the welding / cutting parameters.
The LED light indicates overheating or a malfunction.
The LED lights to indicate that the network connection of the phase has failed.
Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.
A pilot arc is ignited by pressing the torch's trigger. Thus, grates can be cut.
Write the first review for this product

Still not sure?
Our experts are ready to help!- Plasma CNC
- SELECTION
- 400 V
- cutting current: 20 - 85 A
- cutting thickness: 0 - 27 mm
Ready to ship today,
Delivery time appr. 4-7 workdays

Welding Set CNC Plasma Cutter - 85 A - 400 V - Pilot Ignition + Welding...
Ready to ship today,
Delivery time appr. 4-7 workdays
- Plasma CNC
- SELECTION
- 400 V
- cutting current: 20 - 85 A
- cutting thickness: 0 - 27 mm
- Plasma CNC
- SELECTION
- 400 V
- cutting current: 30 - 125 A
- cutting thickness: 0 - 35 mm
Ready to ship today,
Delivery time appr. 4-7 workdays

Welding Set CNC Plasma Cutter - 125 A - 400 V - Pilot Ignition + Welding...
Ready to ship today,
Delivery time appr. 4-7 workdays
- Plasma CNC
- SELECTION
- 400 V
- cutting current: 30 - 125 A
- cutting thickness: 0 - 35 mm
- Plasma
- SELECTION
- 400 V
- cutting current: 20 - 85 A
- cutting thickness: 0 - 27 mm
Ready to ship today,
Delivery time appr. 4-7 workdays

Welding Set Plasma Cutter - 85 A - 400 V - Pilot Ignition + Welding...
Ready to ship today,
Delivery time appr. 4-7 workdays
- Plasma
- SELECTION
- 400 V
- cutting current: 20 - 85 A
- cutting thickness: 0 - 27 mm
- Plasma
- POWER
- 400 V
- Cutting current: 20 - 90 A
- Cutting thickness: 1 - 25 mm
Ready to ship today,
Delivery time appr. 4-7 workdays

Welding Set Plasma Cutter - 90 A - 400 V - Pilot Ignition + Welding...
Ready to ship today,
Delivery time appr. 4-7 workdays
- Plasma
- POWER
- 400 V
- Cutting current: 20 - 90 A
- Cutting thickness: 1 - 25 mm
- Plasma Cutter Spare Parts
- Ceramic caps: 2x
- Electrodes: 4x
- Cutting nozzles: 4x
Ready to ship today,
Delivery time appr. 4-7 workdays

Plasma Spare Parts Set - CUT 85 128 - H / CNC
- Hose length: 10 m
- Air connection: 1/4"
- Operating pressure: 8 bar
- Easy assembly
- Closed plastic casing
Ready to ship today,
Delivery time appr. 4-7 workdays

Retractable Hose Reel - 10 m - 8 bar
- Strong magnetic connection
- Different positions: 45°, 90°, 135°
- High carrying capacity of 21 kg
- Two magnetic angles included in delivery
- Robust steel construction
Ready to ship today,
Delivery time appr. 4-7 workdays

Magnetic Welding Holder 2-Part - 15,5 x 10 x 2 cm
- 10 set replacement protection lenses
- for Firestarter500, Eagle Eye, and Blaster
- Polycarbonate
- Transparent
- 130 x 120 x 20 mm
Ready to ship today,
Delivery time appr. 4-7 workdays

10 set outer protection lens - Metalator/BlackONE/Carbonic/Pokerface/Legend
- 10 set replacement protection lenses
- Metalator, BlackONE, Carbonic, Legend
- Polycarbonate
- Transparent
- 130 x 100 x 20 mm
Ready to ship today,
Delivery time appr. 4-7 workdays

10 set protection lens - Metalator/BlackONE/Carbonic/Pokerface/Legend
- Cutting current: 20 - 85 A
- Cutting depth up to 27 mm
- Pilot arc
- 2 T / 4 T switch
- 400 V
Ready to ship today,
Delivery time appr. 4-7 workdays

Plasma Cutter - 85 A - 400 V - pilot arc
- CNC plasma cutter
- Cutting current: 20 - 85 A
- Cutting depth up to 27 mm
- Pilot arc
- 2T/4T switch/ 400 V
Ready to ship today,
Delivery time appr. 4-7 workdays

CNC Plasma Cutter - 85 A - 400 V - pilot arc
- CNC plasma cutter
- Cutting current: 10 - 125 A
- Cutting depth up to 34 mm
- Pilot arc
- 2T/4T switch/ 400 V
Ready to ship today,
Delivery time appr. 4-7 workdays

CNC Plasma Cutter - 125 A - 400 V - pilot arc
- Cutting current: 30 – 125 A
- Cutting capacity up to 35 mm
- Pilot arc
- 2 T / 4 T change-over switch
- 400 V
Ready to ship today,
Delivery time appr. 4-7 workdays

Plasma Cutter - 125 A - 400 V - pilot arc
- Plasma
- SELECTION
- 400 V
- cutting current: 20 - 85 A
- cutting thickness: 0 - 27 mm
Ready to ship today,
Delivery time appr. 4-7 workdays

Welding Set Plasma Cutter - 85 A - 400 V - Pilot Ignition + Welding...