
TIG Welding Machine Set - TIG AC/DC - welding cart - welding helmet - accessories
Manufacturer: Stamos Germany | item number: EX18000297 | Model:
Product highlights
- TIG AC - DC / MMA
- 60 % duty cycle
- 2-/4-stroke / Pulse function
- Set with welding cart
- Protective clothing and accessories
The inert gas welding machine is supplemented by a welding cart, which will make it much easier for you to transport the machine, as well as the gas cylinder (not included) for TIG welding. There is also a set of spare parts so you can replace wear parts such as ceramic nozzles or clamping sleeves anytime. A main focus during welding should always be on the protective clothing, so this set contains a welding helmet, matching screens and welding gloves.
Show more Show lessWith a welding current from 10 to 220 A, the S-ALU 220 can be used for either TIG or MMA welding, depending on the type of metal and your welding conditions. This welder is also perfect for welding even thin metal sheets.
Show more Show lessThe control panel is clearly arranged and is easy to use while wearing welding gloves. Five toggle switches allow you to directly choose the basic welding functions (TIG, MMA, AC, DC, 2T, 4T, Pulse, On, Off). You can set the required levels for power, pulse frequency, pulse width, gas post flow time and clean width using the 8 continuous control knobs. The large LED display lets you keep an eye on the current amperage.
Show more Show lessThis welder gives you the option of welding with either AC or DC TIG, so you can work with either direct or alternating current, depending on the metal. Alternating current (AC) is suited for light metals such as aluminium or titanium. Direct current (DC) can be used for welding more robust metals such as steel, stainless steel, copper or brass.
Show more Show lessFor TIG welding, simply select the pulse frequency on the control panel, which will enable you to precisely weld thin sheets, among other things. You can set various parameters including pulse frequency and initial, base or end current using the control knob.
Show more Show lessNo additional gas is required for MMA (Manual Metal Arc) welding, enabling it to be used outdoors even in strong wind. The MMA welding clamp can grasp even large electrodes with a diameter of up to 4 mm. With the MMA welding method, you can weld materials such as steel, iron, cast iron, nickel or copper from 1,5 to 8 mm thick.
Show more Show less- Duty cycle of 60% at 220 A
- TIG welder with AC and DC, also suitable for aluminium
- Exact—precise welding thanks to perfect control of all welding parameters
- Adjustable values for gas post flow time, pulse frequency, pulse, duty cycle and clean width
- Powerful MOSFET technology with 2- / 4-stroke switch and HF ignition
The welding cart included in the set not only has space on three levels for your professional welding machine, but also for all the accessories you need for welding. There is a space on the end of the cart for a gas cylinder, which you can secure there on a bracket and with the help of two steel chains. The two large rear wheels and the manoeuvrable front wheels make the trolley highly mobile, while the handle makes it easy to steer. Additionally you will receive as initial accessories for the ALU TIG welding device three ceramic nozzles (5, 6, 7 mm) and three clamping sleeves (2 / 2,4 / 3,2 mm), which you can immediately store on one of the shelves.
Show more Show lessSafety comes first when welding, which is why a welding helmet is indispensable to protect yourself from bright light, but as well as from welding spatter. The set includes the Blaster welding helmet from the Advanced series, which is very lightweight at approx. 500 g and can be adjusted to any head shape. The automatic welding helmet offers a light protection of DIN 9 - 13 and has an impressive reaction time of 1/30,000 seconds. To ensure that you always have a full view during welding, the welding helmet comes with ten matching inner screens.
Show more Show less- Duty cycle of 60% at 220 A
- TIG welder with AC and DC, also suitable for aluminium
- Welding cart is ideal for TIG welding
- Practical protective clothing: Welding helmet and welding gloves
- Additional accessories include clamping sleeves, ceramic nozzles and screens
TIG Welding Machine Set - TIG AC/DC - welding cart - welding helmet - accessories
With the TIG AC/DC welding machine S-ALU 220 from Stamos Power, you get a professional and comprehensive welding tool for a wide variety of welding jobs. The set includes matching accessories that meet your high expectations—naturally also from Stamos Germany, the outfitter for welding professionals.
ALU Welder S-ALU 220
- Gas hose, 3 m
- Earth cable with clamp: 3 m
- Electrode holders with cable: 3 m
- Welding torch, 4 m
- 3 gas cans (1.6 / 2.4 / 3.3 mm)
- Long torch cover
- Tungsten electrode, Ø 2 mm
- 3 clamping sleeves (5, 6, 7 mm)
- Instruction manual
Welding cart S-WECA-1
- Parts
- Assembly instructions
TIG spare parts set 2.0/2.4/3.2
- 3 ceramic nozzles (5, 6, 7 mm)
- 3 clamping sleeves (2.0 / 2.4 / 3.2 mm)
Welding helmet Blaster
10-piece set of Inner Cover Lenses for Firestarter500, Eagle Eye, Blaster
Welding gloves SWG03-TITAN
The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.
Show moreShow lessPowerful fans ensure an optimal removal of heat from the unit.
TIG/MIG and MAG welding require a protective gas. Inert gases, such as argon and helium, as well as active gases (for example carbon dioxide) and other mixtures can be used. The solenoid valve regulates the flow of gas. The valve is operated via a button on the torch.
Show moreShow lessOn the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².
This unit can also be operated using a foot pedal.
This device works with a 1-phase connection (230 V +/- 10 %).
A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.
Value of the arc ignition output current. This current can be adjusted at will. For precision welding, it is recommended to start with reduced power, weld smoothly and eventually adjust the current accordingly.
Show moreShow less
The output current value before the end of the weld. Welding with the final current helps prevent a crater forming at the end of the weld.
The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.
This function reduces the heat to the material. It is primarily suitable for welding thin plates. If MIG welding is used, it is perfect for aluminium welding.
The frequency of impulses during pulse mode.
Relation of pulse duration to period duration.
The maximum value of the electric current while in pulse mode.
The current which maintains the arc while in pulse mode.
This is the percentage difference of the time between the positive and negative direction of the current during a welding period. This feature allows control of the width of the welding seam and the depth of penetration.
Show moreShow lessThis is the percentage difference of the time between the positive and negative direction of the current during a welding period.
Start the weld by placing pressure on the torch button. Stop the process by releasing the button.
By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.
Show moreShow lessA welding method in which the arc is maintained through an electrical current supplied from a non-consumable electrode. The arc is protected from the access of air by an inert gas.
Show moreShow lessElectrode welding with a coated electrode.
Choose between the 2T and 4T mode.
TIG welding is divided into AC (alternating current) and DC (direct current) welding.
Used to switch the pulse function on and off.
By using the SHIFT key the welding mode can be selected.
Shows the welding / cutting parameters.
The LED light indicates overheating or a malfunction.
What is the quality of the welding seams on aluminium?
The machine has been tested by our technical department and shows very good results when welding aluminium.
Write the first review for this product

Still not sure?
Our experts are ready to help!- TIG AC - DC / MMA
- 60 % duty cycle
- 2-/4-stroke / Pulse function
- Set with welding cart
- Protective clothing and accessories
Ready to ship today,
Delivery time appr. 4-7 workdays

TIG Welding Machine Set - TIG AC/DC - welding cart - welding helmet -...
Ready to ship today,
Delivery time appr. 4-7 workdays
- TIG AC - DC / MMA
- 60 % duty cycle
- 2-/4-stroke / Pulse function
- Set with welding cart
- Protective clothing and accessories
- TIG AC-DC / MMA
- POWER
- 220 A / 230 V
- 2/4 tact
- power ventilators
Ready to ship today,
Delivery time appr. 4-7 workdays

Aluminium Welder - 220 A - 230 V - Pulse - 2/4 Tact
Ready to ship today,
Delivery time appr. 4-7 workdays
- TIG AC-DC / MMA
- POWER
- 220 A / 230 V
- 2/4 tact
- power ventilators
- foot pedal TIG / E-Hand
- 2m Cable Length
- PIN-Plug
- including 2 connection cables
This product is currently not available.

Foot Pedal - S-ALU-220
- Strong magnetic connection
- Different positions: 45°, 90°, 135°
- High carrying capacity of 31 kg
- Two magnetic angles included in delivery
- Robust steel construction
Ready to ship today,
Delivery time appr. 4-7 workdays

Magnetic Welding Holder 2-Part - 19 x 12 x 2,4 cm
- Cow split leather
- Size: L
- 91.5 x 58.5 cm
- Premium seams
- Click closures
Ready to ship today,
Delivery time appr. 4-7 workdays

Welding Apron - cow split leather - size L
- MIG / MAG / MMA / TIG lift-arc / FCAW
- 250 A welding current
- 2-/4-steps
- Wire: Ø 0.6 - 1.2 mm
- Hot Start / Anti-Stick
Ready to ship today,
Delivery time appr. 4-7 workdays

MIG/MAG Welder - 250 A - digital - MMA
- Carbon steel, coated
- Incl. spirit level
- Max. Ø: 80 cm
- Max. width: 25 cm
- Axle Ø: 15 - 30 mm
Ready to ship today,
Delivery time appr. 4-7 workdays

Wheel Balancing Stand - universal - with spirit level
- TIG AC-DC / MMA
- POWER
- 220 A / 230 V
- 2/4 tact
- power ventilators
Ready to ship today,
Delivery time appr. 4-7 workdays

Aluminium Welder - 220 A - 230 V - Pulse - 2/4 Tact
- TIG AC-DC / MMA
- 220 A / 60 % DC
- 2-/4-step / Pulse function
- Foot pedal with 8 m cable
Ready to ship today,
Delivery time appr. 4-7 workdays

Aluminium welder - TIG AC/DC - 220 A - 8 Metres Cable - Pulse
- TIG AC/DC / MMA
- 200 A / 230 V
- Pulse function / 2 -/4-stroke
- Digital, programmable
- Hot start
Ready to ship today, Delivery time appr. 6-12 workdays

TIG Welder - 315 A - 400 V- pulse - digital - 2-/4-stroke
- TIG AC/DC / MMA AC/DC
- 200 A / 230 V
- LED / IGBT
- Pulse function / 2/4-step
- Hot Start, Arc Force, Anti-Stick
Ready to ship today,
Delivery time appr. 4-7 workdays

TIG Welder - TIG AC/DC - 200 A - digital - MMA - pulse