Wire Stripping Machine - Table Version
item number: EX10060077 | Model: MSW-WS-007
- cable stripper for manual dismantling
- for single and multiple wired copper cables with a maximum strength of 15 mm
- made from solid steel sheets
- manual operation
- portable and energy saving
- can easily be applied to a workbench or table
With the manual Cable Stripping Machine MSW-WS-007 by MSW you quickly and precisely remove the coating from cables, wires and cords. The professional device works even where conventional clamp cutting methods fail. The cable stripper is suited for single or multiple wired copper, iron or aluminium cables.
The compact and robust cable stripper is ideally suited for mobile use in industrial settings. The device is made from solid sheet steel and is secured on the corner or edge of a table or workbench with two screws.
The manually operated cable stripping machine can always be used anywhere. Three pulleys serve the purpose of adjusting the cable strength and allow for dismantling cables with a maximum diameter of 15 mm.
The cable is moved along the pulleys and simultaneously worked on with the extra sharp blade. Thereby the cable insulation is exactly cut and can subsequently be easily removed.
Information on the Cable Stripping Machine MSW-WS-007 by MSW:
- Kabelschälmaschine MSW-WIRESTRIPPER-007
- 2 Messer
- Schraubenset
- Drehregler
- Bedienungsanleitung
expondo experts reply
8 Jul 2022
Kiitos positiivisista ja rohkaisevista sanoistasi.
Toivottavasti voimme tehdä yhteistyötä kanssasi tulevaisuudessakin.
Hyvää päivänjatkoa!
The whole machine is quite good, but has some limitations: The blade has weak torsion hardness, it moves from side to side, doesn't fit in thge middle of the wire. After more pressure applied to the bottom wheel the blade crashed into two pieces after a few meters of the cable. So I have to return to my old DIY method of stripping. Not so much work for the price was done.
expondo experts reply
15 Jul 2022
Thank you for sharing this.
We DO appreciate your feedback and please know that we’re already working on a solution that will allow us to provide a better experience tomorrow.
We will get it DOne; you’ll see.
This is the best wirestripper for 50€
It only took a little to ship it from polland.
And one of the two knives that came with was bend.
But thats no problem because the machine is working so good.
Next time i order at this place.
Den er vældig fin til alm husbehov
Geeignet für Volldrahtkabel (eindrähtiger Leiter) ab 1,5mm² Durchmesser. Nicht geeignet für Litzenkabel (fein- bzw. feinstdrähtige Leiter). Preis ist auch zu hoch.
Still not sure?
Our experts are ready to help!- manual
- 1 slot
- 1- 15 mm
Ready to ship today,
Delivery time appr. 4-7 workdays
Wire Stripping Machine - Table Version
Ready to ship today,
Delivery time appr. 4-7 workdays
- manual
- 1 slot
- 1- 15 mm
- Power: 370 W
- Cable diameter: 1 - 13 mm
- Wire feeder holes: 5
- Special hardened blades
- Cutting speed: 16 m/min
Ready to ship today,
Delivery time appr. 4-7 workdays
Wire Stripping Machine - 370 W - 5 feed holes
Ready to ship today,
Delivery time appr. 4-7 workdays
- Power: 370 W
- Cable diameter: 1 - 13 mm
- Wire feeder holes: 5
- Special hardened blades
- Cutting speed: 16 m/min
- Power: 1,500 W
- Cable diameter: 1 - 43 mm
- Wire feeder holes: 9
- Special hardened blades
- Cutting speed: 15 m/min
Ready to ship today, Delivery time appr. 6-12 workdays
Wire Stripping Machine - 1,500 W - 9 feed holes
Ready to ship today, Delivery time appr. 6-12 workdays
- Power: 1,500 W
- Cable diameter: 1 - 43 mm
- Wire feeder holes: 9
- Special hardened blades
- Cutting speed: 15 m/min
- Power: 2,200 W
- Cable diameter: 1 - 40 mm
- Wire feeder holes: 21
- Special hardened blades
- Cutting speed: 23 m/min
Ready to ship today, Delivery time appr. 6-12 workdays
Wire Stripping Machine - 2,200 W - 21 feed holes
Ready to ship today, Delivery time appr. 6-12 workdays
- Power: 2,200 W
- Cable diameter: 1 - 40 mm
- Wire feeder holes: 21
- Special hardened blades
- Cutting speed: 23 m/min
- manual
- 11 Insertions
- 1,5 - 38 mm
Ready to ship today,
Delivery time appr. 4-7 workdays
Wire Stripping Machine - manual - 11 slots
Ready to ship today,
Delivery time appr. 4-7 workdays
- manual
- 11 Insertions
- 1,5 - 38 mm
- manual
- 1 slot
- 1,5 - 25 mm
Ready to ship today,
Delivery time appr. 4-7 workdays
Wire Stripping Machine - manual - 1 slot
- Temperature range: 0 ÷ 85 °C
- Heating power: 3,300 watts
- Automatic set temperature function
- Light weight and ergonomic handle
- Very low noise
Ready to ship today,
Delivery time appr. 4-7 workdays
Industrial Electric Heater with Cooling Function - 0 to 85 °C - 3,300 W
- 50 mm diameter
- 400 mm length
- 1 ¼" thread (G 1)
- Dry and wet drilling
- Degree of hardness 96.3 HRB
Ready to ship today,
Delivery time appr. 4-7 workdays
Diamond Core Drill Bit - Ø 50 mm - 400 mm
- Power: 1.680 W
- Rotation speed: 370 r/min
- Magnetic power: 13.800 N
- Max core drills: Ø 60 mm
- RCD magnet switch
Ready to ship today,
Delivery time appr. 4-7 workdays
Magnetic Drill Machine - 1.680 Watt - 370 r/min
- 75 Watt Soldering Iron
- LED Display
- Soldering Temperature: 100 - 480 °C
- solering smoke vent
- 550 Watt Hot Air Gun
Ready to ship today,
Delivery time appr. 4-7 workdays
Set Soldering Station with Tin Roller Clamp and Soldering Smoke Vent +...
- manual
- 1 slot
- 1,5 - 25 mm
Ready to ship today,
Delivery time appr. 4-7 workdays
Wire Stripping Machine - manual - 1 slot
- manual
- 11 Insertions
- 1,5 - 38 mm
Ready to ship today,
Delivery time appr. 4-7 workdays
Wire Stripping Machine - manual - 11 slots
- Power: 2,200 W
- Cable diameter: 1 - 40 mm
- Wire feeder holes: 21
- Special hardened blades
- Cutting speed: 23 m/min
Ready to ship today, Delivery time appr. 6-12 workdays
Wire Stripping Machine - 2,200 W - 21 feed holes
- Power: 370 W
- Cable diameter: 1 - 13 mm
- Wire feeder holes: 5
- Special hardened blades
- Cutting speed: 16 m/min
Ready to ship today,
Delivery time appr. 4-7 workdays
Wire Stripping Machine - 370 W - 5 feed holes