Trolley - 500 kg

The hoist has a 12 m stable steel rope with a pulling force of 250 kg. With the pulley, the traction force doubles to 500 kg. You can transport various heavy objects from one storage place to the next without any problems.

When inserting the pulley, the lifting height is reduced by half to 6 m and the lifting speed goes to 5 m / min from the previous 10 m / min. The lowering speed is 11,6 m / min and halved to 5,8 m / min when using the pulley. Due to the load hook, the load is always fixed to the 4,2 mm thick steel cable. The solid CK45 steel cable, which is not susceptible to torsion, is wear-resistant and extremely durable. The overload protection guarantees that the trolley works reliably and efficiently for a long time, and the 1,020 watts engine will not overheat.

The sliding chassis of the trolley allows you to move it through a curvy territory as long as the turn radius is at least 1 m. The sliding chassis has a speed of 13 m / min. An electromagnetic braking system ensures a quiet operation and holds the load without effort. The deflection hook can be rotated by 360 degrees, allowing for an easier access to the cargo from all sides.

The cable is controlled by a cable remote control, which has a length of 2,4 m for a more comfortable operation. Another highlight is the attached strain relief, which ensures that you can safely work with your trolley at any time. The cable of the remote control is spared, which further increases the already long service life.

The trolley PROCAT 500 is mounted onto a steel girder with a width of 68 - 94 mm and a height of at least 110 mm. You can use a wide flange, I-beam or double T-beam for a steel profile. The high-quality trolley from MSW removes all obstacles for the transportation of large goods.