Whether it's for aluminium, steel, stainless steel or copper, you always use the multi-talent with alternating current (AC) as well as direct current (DC) at a welding thickness of 0.5 - 5 mm optimally as required by your workpiece. It is very easy to select all welding parameters and the welding current up to 200 A on the clear control panel with LCD display and pre-installed languages in English, German, French and Swedish. With just a few buttons and a rotary control, you can regulate all values effortlessly. This is how you achieve precise welding results that are worth seeing!

The modern IGBT inverter allows you to quickly switch between the welding methods TIG DC, TIG AC and E-Hand. With up to 200 A, you can weld most metals effortlessly - no matter what the conditions. Use the pulse function for optimum welding results. Stabilise the arc even under difficult conditions by regulating the pulse frequency up to 200 Hz. Select numerous parameters for the pulse function such as initial, base or final current and adjust them optimally to the workpiece using the control panel.

With the ergonomically shaped welding torch, you can work from various positions, whether vertical, horizontal or overhead. You achieve high quality welds with less sparks or spatter. The modern IGBT inverter allows you to easily change all parameters, be it switching from AC to DC or selecting 2-stroke or 4-stroke operation. You ignite the arc reliably via high frequency.

Do you want to weld outdoors even in strong winds? Then use the electric hand welding method. With a stable amperage of up to 200 A, you can achieve very good welding results on a wide range of metals such as steel, iron, cast iron, nickel or copper.

You can achieve the best results with the Hot Start and Arc-Force functions. The hot-start function ensures an increased welding current for a short time when starting the welding process, so that you weld stably and cleanly from the first moment. Using the Arc Force function, you can adjust the arc to suit the material to be welded and the desired density of the weld. For electrode welding, use the supplied electrode holder for electrodes with a diameter of 1.6-4 mm.