On the construction site, time is money. The demands on the machines used are correspondingly high. With the core drill from the MSW craft supplies range, you can reliably drill holes in hard building materials such as concrete, masonry or asphalt. To do this, you use a drill rig with a guide rail that allows even large holes with a diameter of up to 300 mm.

With the core drill you have access to a power of 3600 W and a maximum speed of 730 rpm for core drilling up to a diameter of 300 mm. The power varies depending on the material: in cement, for example, you can drill diameters of up to 180 mm. Thanks to the guide rail on the stand, you can achieve precise results up to a depth of ≤600 mm. Use three power levels for optimum results, using the largest diameter drill bits at the lowest speed. 

When drilling, rely on reliable water cooling. A connection is directly integrated in the unit. This reduces wear on the drill bit, reduces maintenance on the power tool and increases its service life. To service the carbon brushes, simply remove the protective cover.

Use diamond core drills with different diameters, which you connect securely to the tool via the holder. With the core drill, you can work in reinforced concrete, cement, masonry, asphalt and natural stone. The 3.5 m long power cable offers you maximum freedom of movement. Thanks to the residual current protection circuit (PRCD - Portable Residual Current Device) integrated in the cable, you always use the unit safely. If there is a short circuit in the area of the core drill or the cable, the operation stops immediately.