On a construction site, time is money, and the demands on the machines used are correspondingly high. With the core drill from MSW, you can reliably drill holes in hard building materials such as concrete, masonry or asphalt. Use a drill stand (not included in the scope of delivery) when drilling, then even large holes with a diameter of up to 150 mm are possible.

With the core drill you have access to a power of 1800 W and a maximum speed of 2860 rpm for hand-guided core drilling up to a diameter of 90 mm. Use two power levels for optimal drilling results, using the largest diameter drill bits at the lowest speed. With a core drill stand (not included), you not only increase the precision of the drilling, but also use larger drills up to 150 mm.

When drilling, rely on reliable water cooling. A connection is directly integrated in the unit. This reduces wear on the drill, you maintain the machine less and achieve a longer service life. To service the carbon brushes, simply remove the protective cover.

Use diamond core drills with different diameters, which you connect securely to the tool via the holder. Use the core drill to drill into reinforced concrete, cement, masonry, asphalt and natural stone. The 3.5 m long power cable offers you maximum freedom of movement. Thanks to the residual current protection circuit (PRCD - Portable Residual Current Device) integrated in the cable, you always use the unit safely. If a short circuit occurs in the area of the core drill or the cable, operation is stopped immediately.