Welding Set Plasma Cutter - 40 A - 230 V - digital - Pilot Ignition + Welding helmet –Pokerface - PROFESSIONAL SERIES

item number: EX18000194 / Model:

Welding Set Plasma Cutter - 40 A - 230 V - digital - Pilot Ignition + Welding helmet –Pokerface - PROFESSIONAL SERIES

  • item number: EX18000194
  • Model:
  • In the product range since: 2004
862.00€  

Prices incl. VAT plus shipping costs*

This product is currently not available.

Welding Set Plasma Cutter - 40 A - 230 V - digital - Pilot Ignition + Welding helmet –Pokerface - PROFESSIONAL SERIES

  • Adjustable helmet
  • Visor-face distance adjustable
  • Light protection DIN 4 – 8 or DIN 9 - 13
  • 100 x 65 mm field of view
  • Viewing angle adjustable
  • Light protection for all common welding processes
  • Delay time (0.25 - 0.8 s)
  • Switching time 1 / 30,000 s

Welding Set Plasma Cutter - 40 A - 230 V - digital - Pilot Ignition + Welding helmet –Pokerface - PROFESSIONAL SERIES

You will save up to 3% when purchasing this set, compared to a single item order

Welder

We continue to rely on our innovative technology and introduce WELBACH - our brand of digital welding machines. The units use the fully digitally operated Stamos machine interface. High quality control panels ensure maximum comfort. The digital signal processors monitor all parameters so that the operations performed always exactly match the values set. The Welbach range plasma cutters are also equipped with original TRAFIMET® plasma torches.

+

Welding helmet

The Pokerface welding helmet by the Professional Series from Stamos Germany - the best choice for professional and hobby welders

The automatic Pokerface welding helmet from the Professional Series from Stamos Germany is characterized by its light weight and good response speed. The welding helmet is extremely versatile and can be used within all common welding processes (MIG welding, MAG / CO2 welding, manual welding, TIG welding, plasma cutting and micro plasma cutting).

In addition, the automatic welding helmet Pokerface is known for its long-lasting visibility (cartridges). The cartridges are powered by solar cells and a CR2450 battery. The welding helmet works with a particularly wide range of light protection, which can be flexibly adjusted from DIN 4 - 8 or from DIN 9 - 13. The size of the screen is an extraordinary 100 x 65 mm. In this way, you can always keep an overview of all the essential details.

The welding helmet is made of robust plastic. This ensures that the welding mask weighs only about 500 grams and that you do not have to worry about any restrictions or pain during work. A particularly prominent characteristic of the Pokerface is the simple adaptation to every head shape. Also adjustable is the distance between the face and the visor. This guarantees that the helmet sits extremely securely and can be used first-class.

In addition, Professional Series welding helmets have an outstanding response time of 1 / 30,000 seconds from light to dark. This means that you are always protected from dangerous arcs. The outstanding reaction time also allows for a seamless transition without the eyes being too stressed or requiring a prolonged adaptation time.

The automatic welding helmet Pokerface can be used with all common welding procedures and also has a practical grind mode. Thus, the helmet can be used for pure roughing, cutting and grinding work without an annoying up-and-down. Pokerface stands out as early as 3 amps. Whether you are an artisan, or want to use the welding helmet for private use or to be used in the workshop, the Pokerface combines all the necessary protection mechanisms and impresses with its quality and longevity.

 
Article
PROLOX60-A
Rated input voltage
1~230 V
Power frequency
50/60 Hz
Rated input current
20 A
Rated input power
4,3 kVA
No-load voltage
310 V
Cutting current
15 - 40 A
Rated duty cycle
60%
Air Requirement
4 - 6 bar, 175 l/min
Insulation grade
F
Protection grade
IP21S
Cutting thickness (carbon plate )
≤ 15 mm
Arc ignition mode
Non-Contact
Working pressure(kgf/cm2)
2,5~4
Weight (kg, netto)
15,35 kg
Weight (kg, brutto)(
17,1 kg
Dimension (cm, netto) (LxWxH)
44 x 18,5 x 32 cm
Dimension (cm, brutto) (LxWxH)
58 x 36 x 39 cm
Ignition
Low Frequency

 

Model
Pokerface
Article number
2986
Condition
New
Material
Plastic
Head fitting
Adjustable
Face-sight-clearance
Adjustable
Field of view
100  x 65 mm
Arc sensors
4
Power supply
Solar and 1 x battery CR2450
Light protection
DIN 4 – 8 / DIN 9 - 13
Light level
DIN 3
Switching time
1/30.000 s
Delay (when lightened)
0,25 - 0,8 s
Minimum welding current
3 A
Optical class
1
Scattered light
2
Homogeneity
1
Viewing angle dependency
1
Grind-Mode
Yes
Operating temperature
-10 to +55 °C
Storage temperature
-20 to +70 °C
Dimensions (LxWxH)
44 x 18,5 x 32 cm
Weight
15,35 kg
Shipping dimensions (LxWxH)
58 x 36 x 39 cm
Shipping weight
17,1 kg
 
IGBT

IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode. This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology.

 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
MMA WELDING CABLE CONNECTOR

 

 
CUTTING TORCH CONNECTION

 

 
SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

 
WELDING CURRENT

 

 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
4-STROKE

By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

 
PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

 
POWER SWITCH

 

 
PARAMETERS / FUNCTION SELECTION

 

 
PARAMETERS / FUNCTION CONTROL

 

 
"2T / 4T" SELECTION SWITCH

Choose between the 2T and 4T mode.

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

 
PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.

 
PILOT IGNITION

A pilot arc is ignited by pressing the torch's trigger. Thus, grates can be cut.

2075-panel

 

 

  1. ON/OFF = Power Switch
  2. Indicator light 2T/4T
Option Nr 1:
 
2075-g1 off
 
2075-g2 off
2T - function - spotty cutting of full material
Option  Nr 2:
 
2075-g1 on
 

2075-g2 off

4T – function - continuous cutting of full material
Option Nr 3:
 
2075-g1 off
 
2075-g2 on

2T – function - spotty cutting of grid

Option Nr 4:
 
2075-g1 on
 
2075-g2 on
4T - function  - continuous cutting of grid

 

  1. LED Display = Displays the current amperage
  2. Working Indicator Light = It will be on during cutting operation
  3. Thermal Overload Indicator Lamp
  4. Trigger hold ON/OFF = Auto lock ON/OFF, Choosing "2T" or "4T" state
  5. Power Supply Controller (increase button)
  6. Power Supply Controller (decrease button)
  7. Mode Selector = Turns the air supply ON Prior to cutting
  8. Air pressure regulation
  9. Manometer
  10. grounding
  11. cutting torch connection

 

welbach-plasmaschneider-s45-1

welbach-plasmaschneider-s45-2

 



PLASMA - CUTTING TORCH
High cutting power and economic operation with or without HF ignition are the characteristics of our air- and water - cooled from plasma cutting torches. Some of the highlights from our plasma range are presented below.

The Ergocut series
The range of air-cooled plasma cutting torches with arc ignition without high frequency offers several advantages:

  • low electromagnetic interference
  • low electrical load on the torch
  • low risk of blockage during the mechanical-pneumatic motion for arc formation
  • longer life of wear parts
  • simple, effortless operation
  • mechanical protection when operating the switch


Technical data of the S45:

  • Volt Class: M
  • Length: 6 meters
  • Air consumption: 115 l/min
  • Air pressure: 5 bar
  • Duty Cycle 60%: 40A
  • Air pressure switch: 3.5 bar

 

 

welbach-plasmaschneider-s45-3

 

welbach-plasmaschneider-s45-4-uk

welbach-plasmaschneider-s45-5

  • plasma cutter PROLOX 60-A
  • Ergocut S45 torch by trafimet

 

  • Welding helmet "Pokerface"
  • Instruction manual