Welding Set Aluminium Welder - 200 A - 230 V - Pulse - digital - 2/4 Tact + Welding helmet –Pokerface - PROFESSIONAL SERIES

item number: EX18000187 / Model:

Welding Set Aluminium Welder - 200 A - 230 V - Pulse - digital - 2/4 Tact + Welding helmet –Pokerface - PROFESSIONAL SERIES

  • item number: EX18000187
  • Model:
  • In the product range since: 2004
 
988.00€  

Prices incl. VAT plus shipping costs*

Ready to ship today, Delivery time appr. 8-10 workdays

Welding Set Aluminium Welder - 200 A - 230 V - Pulse - digital - 2/4 Tact + Welding helmet –Pokerface - PROFESSIONAL SERIES

Highlights

  • Adjustable helmet
  • Visor-face distance adjustable
  • Light protection DIN 4 – 8 or DIN 9 - 13
  • 100 x 65 mm field of view
  • Viewing angle adjustable
  • Light protection for all common welding processes
  • Delay time (0.25 - 0.8 s)
  • Switching time 1 / 30,000 s

Keyfacts

Welding Set Aluminium Welder - 200 A - 230 V - Pulse - digital - 2/4 Tact + Welding helmet –Pokerface - PROFESSIONAL SERIES

You will save up to 3% when purchasing this set, compared to a single item order

Welder

The TIG welding device S-DIGITAC 200P by Stamos Selection is a robustly built welding machine with state-of-the-art technology providing excellent reliability. It has an input voltage of 230 V and measures 60 x 33 x 37,5 cm while weighing just 36,2 kg due to the use of lightweight, sturdy materials. The S-DIGITAC 200P offers welding current settings between 10 and 200 A for TIG welding and between 10 and 180 A for MMA welding, providing great flexibility for all kinds of conditions. Order today to secure your competitively priced Stamos Selection S-DIGITAC 200P.

+

Welding helmet

The Pokerface welding helmet by the Professional Series from Stamos Germany - the best choice for professional and hobby welders

The automatic Pokerface welding helmet from the Professional Series from Stamos Germany is characterized by its light weight and good response speed. The welding helmet is extremely versatile and can be used within all common welding processes (MIG welding, MAG / CO2 welding, manual welding, TIG welding, plasma cutting and micro plasma cutting).

In addition, the automatic welding helmet Pokerface is known for its long-lasting visibility (cartridges). The cartridges are powered by solar cells and a CR2450 battery. The welding helmet works with a particularly wide range of light protection, which can be flexibly adjusted from DIN 4 - 8 or from DIN 9 - 13. The size of the screen is an extraordinary 100 x 65 mm. In this way, you can always keep an overview of all the essential details.

The welding helmet is made of robust plastic. This ensures that the welding mask weighs only about 500 grams and that you do not have to worry about any restrictions or pain during work. A particularly prominent characteristic of the Pokerface is the simple adaptation to every head shape. Also adjustable is the distance between the face and the visor. This guarantees that the helmet sits extremely securely and can be used first-class.

In addition, Professional Series welding helmets have an outstanding response time of 1 / 30,000 seconds from light to dark. This means that you are always protected from dangerous arcs. The outstanding reaction time also allows for a seamless transition without the eyes being too stressed or requiring a prolonged adaptation time.

The automatic welding helmet Pokerface can be used with all common welding procedures and also has a practical grind mode. Thus, the helmet can be used for pure roughing, cutting and grinding work without an annoying up-and-down. Pokerface stands out as early as 3 amps. Whether you are an artisan, or want to use the welding helmet for private use or to be used in the workshop, the Pokerface combines all the necessary protection mechanisms and impresses with its quality and longevity.

 
Model
S-DIGITAC 200P
Voltage
230 V
Frequency
50/60 Hz
Functions
TIG
MMA
Rated input current
4,6 kVA
6,2 kVA
Output current scope
10 - 200 A
10 - 180 A
Output current scope
10,4 - 18 V
20,4 - 27,2 V
Open-circuit voltage
62 V
Gas pre-flow time
0-1 s
Duty cyle
60%
Cleaning width
20 - 80%
Decay time
0 - 10 s
Gas after-flow time
1 - 10 s
Current base value
10 - 90%
Pulse frequency
0,5 - 300 Hz
Pulse work cycle
10 - 90%
Arc start
HF
Performance Factor (cos)
0.93
Efficiency
85%
Protection class
IP21S
Welding thickness
0,5 - 10mm
Insulation class
F
Dimension (LxWxH)
60 x 37,5 x 33 cm
Weight
36,2 kg
Shipping dimension (LxWxH)
73 x 48 x 47 cm
Shipping weight
36,8 kg
Model
Pokerface
Article number
2986
Condition
New
Material
Plastic
Head fitting
Adjustable
Face-sight-clearance
Adjustable
Field of view
100  x 65 mm
Arc sensors
4
Power supply
Solar and 1 x battery CR2450
Light protection
DIN 4 – 8 / DIN 9 - 13
Light level
DIN 3
Switching time
1/30.000 s
Delay (when lightened)
0,25 - 0,8 s
Minimum welding current
3 A
Optical class
1
Scattered light
2
Homogeneity
1
Viewing angle dependency
1
Grind-Mode
Yes
Operating temperature
-10 to +55 °C
Storage temperature
-20 to +70 °C
Dimensions (LxWxH)
60 x 37,5 x 33 cm
Weight
36,2 kg
Shipping dimensions (LxWxH)
73 x 48 x 47 cm
Shipping weight
36,8 kg
 
IGBT

IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode. This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology.

 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
PROTECTIVE GAS

TIG/MIG and MAG welding require a protective gas. Inert gases, such as argon and helium, as well as active gases (for example carbon dioxide) and other mixtures can be used. The solenoid valve regulates the flow of gas. The valve is operated via a button on the torch.

 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
MMA WELDING CABLE CONNECTOR

 

 
TIG TORCH CONNECTOR

 

 
FOOT PEDAL CONNECTOR

This unit can also be operated using a foot pedal.

 
SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

 
NON-CONTACT HF-IGNITION

A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.

 
GAS PRE-FLOW TIME

This is the time taken from the moment of pressing the torch button to that of the electric arc igniting. During this process the solenoid valve opens and the released gas pushes the oxygen from the gas lines and in doing so, forms a protective atmosphere for the arc.

 
STARTING CURRENT

Value of the arc ignition output current. This current can be adjusted at will. For precision welding, it is recommended to start with reduced power, weld smoothly and eventually adjust the current accordingly.

 
CURRENT RISE TIME

The time taken by the output power to rise to that of the welding current’s value.

 
WELDING CURRENT

 

 
DOWN SLOPE TIME

The time taken of the output welding current to lower to that of the terminal current.

 
FINAL CURRENT

The output current value before the end of the weld. Welding with the final current helps prevent a crater forming at the end of the weld.

 
GAS POST-FLOW TIME

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.

 
PULSE

This function reduces the heat to the material. It is primarily suitable for welding thin plates. If MIG welding is used, it is perfect for aluminium welding.

 
PULSE FREQUENCY

The frequency of impulses during pulse mode.

 
PULSE DUTY FACTOR

Relation of pulse duration to period duration.

 
IMPULSE CURRENT

The maximum value of the electric current while in pulse mode.

 
BASE CURRENT

The current which maintains the arc while in pulse mode.

 
POWER FACTOR CORRECTION

This is the percentage difference of the time between the positive and negative direction of the current during a welding period. This feature allows control of the width of the welding seam and the depth of penetration.

 
CLEAN WIDTH - PARAMETERS OF POWER FACTOR CORRECTION

This is the percentage difference of the time between the positive and negative direction of the current during a welding period.

 
CLEAN SCOPE - AC STROMBALANCE PARAMETER

This is the percentage difference between the positive and negative welding current value during a period.

 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
4-STROKE

By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

 
HOT START

Through automatically boosting the tension at the ignition of the arc, this function facilitates the electrical arc ignition. After ignition, the unit automatically returns to the pre-set voltage.

 
ARC FORCE

The current value increases automatically when the arc is shorter.

 
ANTI-STICK

This function helps to prevent overheating of the electrode by switching off the welding current when the electrode sticks to the material.

 
TIG WELDING

A welding method in which the arc is maintained through an electrical current supplied from a non-consumable electrode. The arc is protected from the access of air by an inert gas.

 
MMA WELDING

Electrode welding with a coated electrode.

 
POWER SWITCH

 

 
PARAMETERS / FUNCTION SELECTION

 

 
PARAMETERS / FUNCTION CONTROL

 

 
"2T / 4T" SELECTION SWITCH

Choose between the 2T and 4T mode.

 
TIG AC/DC MODE SWITCH

TIG welding is divided into AC (alternating current) and DC (direct current) welding.

 
PULSE FUNCTION SWITCH

Used to switch the pulse function on and off.

 
SWITCH BETWEEN THE WELDING METHODS

By using the SHIFT key the welding mode can be selected.

 
PROG

The welding unit can internally save programs. You can start the desired program by pressing the button PROG.

 
SAVE

The unit can store several welding programs digitally under selected numbers, for example programs specific to the requirements of certain materials.

 
DISPLAY

Shows the welding / cutting parameters.

  • S-DIGITAC 200P
  • TIG hose package: 4 m
  • ground cable: 3 m
  • electrode holder: 3 m
  • 4 ceramic caps
  • 2 various electrode nozzle holders
  • 1 universal tungsten electrode
  • back cap
  • instruction manual

 

  • Welding helmet "Pokerface"
  • Instruction manual