CNC Plasma Cutter - 125 A - 400 V - pilot arc
1,105.00

CNC Plasma Cutter - 125 A - 400 V - pilot arc

Manufacturer: Stamos Selection | item number: EX10020078 | Model: S-PLASMA 125CNC

CNC Plasma Cutter - 125 A - 400 V - pilot arc
CNC Plasma Cutter - 125 A - 400 V - pilot arc
CNC Plasma Cutter - 125 A - 400 V - pilot arc
CNC Plasma Cutter - 125 A - 400 V - pilot arc
CNC Plasma Cutter - 125 A - 400 V - pilot arc
CNC Plasma Cutter - 125 A - 400 V - pilot arc
Play Video
360° photo
1,105.00

Prices incl. VAT plus shipping costs*

  • Free shipment to Ireland

    ?

    Ready to ship today,
    Delivery time appr. 4-6 workdays

  • 30 days return service

    ?

Product Highlights

  • CNC plasma cutter
  • Cutting current: 10 - 125 A
  • Cutting depth up to 34 mm
  • Pilot arc
  • 2T/4T switch/ 400 V

S-PLASMA 125CNC—sophisticated welding functions combined with high cutting performance

 

The plasma cutter from Stamos Selection works with a 400 V three-phase operating voltage and cuts workpieces from a wide variety of metallic materials. These include low and high-alloy tool steels as well as the non-ferrous metals aluminium, copper and titanium. The professional plasma cutter S-PLASMA 125CNC offers you a wide range of features and outstanding characteristics that make it perfect for use in various CNC applications.

Show moreShow less
 

With a cutting depth of 34 mm, the plasma cutter is equipped for demanding repair and renovation tasks as well as for efficient use in production. Material loss is kept to a minimum with a cutting width of only 1.4 mm. The high performance is made possible by the particularly reliable IGBT inverter technology. Due to the modern design inside the CNC plasma cutter, disturbances such as interference of the high-frequency high-pressure arc are avoided or reduced. For this reason, this plasma cutter is particularly impressive in combination with a CNC machine and thus forms the perfect synergy.

Show moreShow less
 

At a duty cycle of 60 % the cutting current is 125 A. At 100 percent duty cycle a high 96.8 A is still possible. With a working range between 10 and 125 A the Stamos provides the necessary flexibility in the choice of cutting current. The pilot ignition works contact-free and extremely reliable. The professional plasma cutter S-PLASMA 125CNC offers you a wide range of features and outstanding characteristics that make it perfect for use in various CNC applications.

Show moreShow less
 

However, high equipment performance alone is by no means sufficient for efficient work. With its 5 m long plasma hose in connection with the 4 m long ground cable, the Stamos plasma cutter offers a high degree of freedom of movement. You can also choose between 2T and 4T mode to adapt the cutting torch to your work situation.

Show moreShow less
 

To prevent damage to the torch or deformation of the workpiece and oxidation reactions after the cut, the air cooling continues to run afterward. The post-flow interval can be selected between 5 and 60 s in several steps. The power unit is protected against damage by fan cooling and overheating protection.

Show moreShow less
 

Problems with the operating temperature as well as other malfunctions are indicated by an LED on the control unit. The LED display for the cutting current and the cutting current controller are also located in this clearly visible space on the front of the unit.

Show moreShow less

Note: The device does not include a high voltage current connector!

Highlights

  • CNC connection—ideal for CNC plasma cutting with high-quality CNC plasma cutting torch
  • Excellent performance values—125 A at 60 % duty cycle
  • Separate working modes—for short-term and continuous operation, powerful cooling of the power unit, the torch and the workpiece
  • Effective—pilot plasma arc ignition
  • High-performance—cutting depth of up to 34 mm
  • Precise—easy-to-read LED display

Plasma cutter with CNC plasma cutting torch

The plasma cutter S-PLASMA 125CNC from Stamos Germany is specially designed for professional use with CNC machines. It has plenty of power reserves for cutting through thick metallic materials using air plasma. The plasma cutter impresses with special features such as a powder-coated sheet steel housing, high efficiency and first-class cutting quality.

Model
S-PLASMA 125CNC
Condition
New
Function
Plasma cutting
Input voltage
400 V three-phase
Input frequency
50 Hz
Rated input current
22 A
Max. input current
31 A
Rated input power
15,4 kVA
Max. input power
21,8 kVA
Load-free voltage
300 V
CNC
Yes
Cutting current
10 - 125 A
Duty cycle
60 %
Cutting current at 100% duty cycle
96,8 A
Cutting current at 60% duty cycle
125 A
Air post-flow time
5, 10, 60 s
Housing cooling
Fan
Torch cooling
Air
Ignition
Pilot
Length, grounding cable
4 m
Length, plasma cable assembly
5 m
Length, compressed air hose
4 m
Length, power cord
3,8 m
Max. cutting depth
34 mm
Cutting width
1,4 mm
Required air pressure
7 bar
Insulation class
F
Protection class
IP21S
Dimensions (LxWxH)
67 x 27 x 47 cm
Weight
30 kg
Shipping dimensions (LxWxH)
74,5 x 37,5 x 52 cm
Shipping weight
34,9 kg
Technical drawing
Delivery Package
  • Plasma cutter S-Plasma 125CNC
  • Plasma cable assembly: 5 m
  • Air hose: 4 m
  • Grounding cable: 4 m
  • Ceramic nozzle
  • 5 cutting nozzles
  • 5 plasma electrodes
  • Pressure gauge and pressure regulator
  • 2 clamp rings
  • 2 gas hose adaptors
  • Wrench
  • Hose cover
  • Instruction manual
 
IGBT

IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode. This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology.

Show moreShow less
 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

Show moreShow less
 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
CUTTING TORCH CONNECTION

 

 
SUPPLY VOLTAGE

This device works with a 3-phase connection (400 V +/- 10 %).

 
CNC CONNECTOR

The CNC connector is designed to connect the plasma cutter to CNC controls. Once connected, it will signal the THC module, which controls the height of the burner.

 
WELDING CURRENT

 

 
GAS POST-FLOW TIME

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.

 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
4-STROKE

By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

Show moreShow less
 
PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

 
POWER SWITCH

 

 
"2T / 4T" SELECTION SWITCH

Choose between the 2T and 4T mode.

 
DISPLAY

Shows the welding / cutting parameters.

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

 
VOLTAGE LED

The LED lights to indicate that the supply voltage has dropped by 10% or more than that of the required voltage.

 
OVERVOLTAGE LED

The LED lights to indicate that the actual voltage is 10% or more than the value of the supply voltage.

 
PRESSURE DROP LED

The LED lights to indicate that the gas pressure has fallen below that of the minimum value.

 
LOSS OF PHASE LED

The LED lights to indicate that the network connection of the phase has failed.

 
PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.

 
PILOT IGNITION

A pilot arc is ignited by pressing the torch's trigger. Thus, grates can be cut.

The diverse assortment of products from Stamos enable you to cut or join materials efficiently and precisely. Our portfolio ranges from professional soldering stations to top-class welding machines and precise plasma cutters, to the matching accessories. Let us demonstrate to you the functionality, quality and versatility – not to mention the cost-effectiveness – of our professional line. Our videos show our products in action.

What's the maximum thickness of material the plasma cutter can cut through?

The maximum thickness is 34 mm.

Is the plasma cutter easy to transport?

Despite its compaction size, the device weighs 33.9 kg, so we recommend using a welding trolley to transport it. You can also find a selection of welding trolleys at expondo.

How does the device inform me when it's threatening to overheat?

A diode lights up as soon as the maximum duty cycle is exceeded and the device heats up too much as a result. The light will also warn you if the plasma cutter generates too much heat due to malfunction. In both cases, the operation should be interrupted.

Write the first review for this product



Leave a review
Evaluations will be activated after verification.

The fields marked with * are required.

Einzelteile von Plasma Ersatzteilset - CUT 85 125 - H / CNC
59.00€
Prices incl. VAT plus shipping costs
Schweißhelm – BlackONE – EXPERT SERIES - 2988 - 1
Instead of: 89.00€
79.00€
Prices incl. VAT plus shipping costs
This product
  • CNC plasma cutter
  • Cutting current: 10 - 125 A
  • Cutting depth up to 34 mm
  • Pilot arc
  • 2T/4T switch/ 400 V

Ready to ship today,
Delivery time appr. 4-6 workdays

CNC Plasma Cutter - 125 A - 400 V - pilot arc

CNC Plasma Cutter - 125 A - 400 V - pilot arc

1,105.00€  

Ready to ship today,
Delivery time appr. 4-6 workdays

  • CNC plasma cutter
  • Cutting current: 10 - 125 A
  • Cutting depth up to 34 mm
  • Pilot arc
  • 2T/4T switch/ 400 V
  • Dimensions 200 x 60 x 96 cm
  • 2 Sliding doors
  • Upstand: 115 mm
  • Height-adjustable stands
  • Stainless steel

Ready to ship today, Delivery time appr. 9-10 workdays

Plasma cutter - 120 A - 400 V - Pilot ignition

Plasma cutter - 120 A - 400 V - Pilot ignition

(1)
1,259.00€  

Ready to ship today, Delivery time appr. 9-10 workdays

  • Dimensions 200 x 60 x 96 cm
  • 2 Sliding doors
  • Upstand: 115 mm
  • Height-adjustable stands
  • Stainless steel
  • Cutting current: 30 – 125 A
  • Cutting capacity up to 35 mm
  • Pilot arc
  • 2 T / 4 T change-over switch
  • 400 V

Ready to ship today,
Delivery time appr. 4-6 workdays

Plasma Cutter - 125 A - 400 V - pilot arc

Plasma Cutter - 125 A - 400 V - pilot arc

(1)
1,059.00€  

Ready to ship today,
Delivery time appr. 4-6 workdays

  • Cutting current: 30 – 125 A
  • Cutting capacity up to 35 mm
  • Pilot arc
  • 2 T / 4 T change-over switch
  • 400 V
  • CNC plasma cutter
  • Cutting current: 20 - 85 A
  • Cutting depth up to 27 mm
  • Pilot arc
  • 2T/4T switch/ 400 V

Ready to ship today,
Delivery time appr. 4-6 workdays

CNC Plasma Cutter - 85 A - 400 V - pilot arc

CNC Plasma Cutter - 85 A - 400 V - pilot arc

(4)
809.00€  

Ready to ship today,
Delivery time appr. 4-6 workdays

  • CNC plasma cutter
  • Cutting current: 20 - 85 A
  • Cutting depth up to 27 mm
  • Pilot arc
  • 2T/4T switch/ 400 V
  • Cutting current: 20 - 90 A
  • Cutting depth: 25 mm
  • HF ignition / pilot arc
  • LED display
  • 5 m cable assembly

Ready to ship today,
Delivery time appr. 4-6 workdays

Plasma Cutter - 90 A - 400 V

Plasma Cutter - 90 A - 400 V

(3)
795.00€  

Ready to ship today,
Delivery time appr. 4-6 workdays

  • Cutting current: 20 - 90 A
  • Cutting depth: 25 mm
  • HF ignition / pilot arc
  • LED display
  • 5 m cable assembly