Welding Set Plasma Cutter - 90 A - 400 V - Pilot Ignition + Welding helmet – Carbonic - PROFESSIONAL SERIES

item number: EX18000222 / Model:

Welding Set Plasma Cutter - 90 A - 400 V - Pilot Ignition + Welding helmet – Carbonic - PROFESSIONAL SERIES
Zoom
Welding Set Plasma Cutter - 90 A - 400 V - Pilot Ignition + Welding helmet – Carbonic - PROFESSIONAL SERIES
     

Welding Set Plasma Cutter - 90 A - 400 V - Pilot Ignition + Welding helmet – Carbonic - PROFESSIONAL SERIES

  • item number: EX18000222
  • Model:
  • In the product range since: 2003
857.00€  

Prices incl. VAT plus shipping costs*

Ready for immediate shipping When ordering and making payment within the next 2 hours 0 mins , shipping will happen today.

Ready to ship today,
Delivery time appr. 4-6 workdays

Welding Set Plasma Cutter - 90 A - 400 V - Pilot Ignition + Welding helmet – Carbonic - PROFESSIONAL SERIES

Highlights & Key Facts

  • for cutting metals such as steel, stainless steel, copper, aluminium, etc.
  • IGBT Inverter Technology
  • current can be steplessly regulated
  • powder coated steel sheet casing
  • robust and compact design
  • easy handling
  • delivery package: plasma torch P80, earth terminal, electrode, nozzle, gas pipe
  • high voltage plug not included
  • Adjustable helmet
  • Visor-face distance adjustable
  • Light protection DIN 4 – 8 or DIN 9 - 13
  • 100 x 65 mm field of view
  • Viewing angle adjustable
  • Light protection for all common welding processes
  • Delay time (0.25 - 0.8 s)
  • Switching time 1 / 30,000 s
You will save up to 3% when purchasing this set, compared to a single item order Welder You need a precise, compact and powerful plasma cutter? One that can be used for industry, craft...More information

Description

You will save up to 3% when purchasing this set, compared to a single item order

Welder

You need a precise, compact and powerful plasma cutter? One that can be used for industry, craft trades and hobby workshops? The S-CUTTER 90 by Stamos Germany has a maximum cutting strength of 25 mm. A light arc takes over the cutting and separating. This arc is started with a high frequency ignition and develops under high electrical voltage between electrode and base material. To increase intensity and stability, additional pressurised air is added. The S-CUTTER 90’s welding current can be steplessly and exactly regulated between 20 and 90 ampere. Thus the device can be ideally adjusted to your needs. The robust and compact construction and the weight of only 34 kg make the plasma cutter easy to transport and enable varied possibilities for use.

+

Welding helmet

The Carbonic welding helmet by the Professional Series from Stamos Germany - the best choice for professional and hobby welders

The automatic Carbonic welding helmet from the Professional Series from Stamos Germany is characterized by its light weight and good response speed. The welding helmet is extremely versatile and can be used within all common welding processes (MIG welding, MAG / CO2 welding, manual welding, TIG welding, plasma cutting and micro plasma cutting).

In addition, the automatic welding helmet Carbonic is known for its long-lasting visibility (cartridges). The cartridges are powered by solar cells and a CR2450 battery. The welding helmet works with a particularly wide range of light protection, which can be flexibly adjusted from DIN 4 - 8 or from DIN 9 - 13. The size of the screen is an extraordinary 100 x 65 mm. In this way, you can always keep an overview of all the essential details.

The welding helmet is made of robust plastic. This ensures that the welding mask weighs only about 500 grams and that you do not have to worry about any restrictions or pain during work. A particularly prominent characteristic of theCarbonic is the simple adaptation to every head shape. Also adjustable is the distance between the face and the visor. This guarantees that the helmet sits extremely securely and can be used first-class.

In addition, Professional Series welding helmets have an outstanding response time of 1 / 30,000 seconds from light to dark. This means that you are always protected from dangerous arcs. The outstanding reaction time also allows for a seamless transition without the eyes being too stressed or requiring a prolonged adaptation time.

The automatic welding helmet Carbonic can be used with all common welding procedures and also has a practical grind mode. Thus, the helmet can be used for pure roughing, cutting and grinding work without an annoying up-and-down. Carbonic stands out as early as 3 amps. Whether you are an artisan, or want to use the welding helmet for private use or to be used in the workshop, the Carbonic combines all the necessary protection mechanisms and impresses with its quality and longevity.

 

Technical Details

Model
S-CUTTER 90
Item Number
2129
Condition
New
Rated Input Voltage
400 V, 3-Phase(s)
Input Frequency
50/60 Hz
Rated Input Current
14,7 A
max. Input Current
19,1 A
Rated Input Power
9,5 kVA
max. Input Power
12,6 kVA
No-load Voltage
233 V
Cutting Current
20 - 90 A
Duty Cycle
60 %
Cutting Current at 100% Duty Cycle
69,7 A
Cutting Current at 60% Duty Cycle
90 A
Ignition
HF – High Frequency
Cutting Strength
1 - 25 mm
Cutting Width
1,2 mm
Air Flow
240 l/min
Air Pressure
4,5 bar
Length Cable Package
5 m
Length Earth Cable
3 m
Length Power Cable
2 m
Device Cooling
Aeration
Torch Cooling
Air
Power Factor
0,93
Efficiency (under Rated Power)
≥ 0,85
Insulation Class
F
Protection Class
IP21
Measurements (LxWxH)
54 x 28 x 46 cm
Weight
26 kg
Shipping Measurements (LxWxH)
68 x 46 x 52 cm
Shipping Weight
36,2 kg
Model
Carbonic
Article number
2987
Condition
New
Material
Plastic
Head fitting
Adjustable
Face-sight-clearance
Adjustable
Field of view
100  x 65 mm
Arc sensors
4
Power supply
Solar and 1 x battery CR2450
Light protection
DIN 4 – 8 / DIN 9 - 13
Light level
DIN 3
Switching time
1/30.000 s
Delay (when lightened)
0,25 - 0,8 s
Minimum welding current
3 A
Optical class
1
Scattered light
2
Homogeneity
1
Viewing angle dependency
1
Grind-Mode
Yes
Operating temperature
-10 to +55 °C
Storage temperature
-20 to +70 °C
Dimensions (LxWxH)
54 x 28 x 46 cm
Weight
26 kg
Shipping dimensions (LxWxH)
68 x 46 x 52 cm
Shipping weight
36,2 kg

Functions

 
IGBT

IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode. This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology.

 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR
 
CUTTING TORCH CONNECTION
 
SUPPLY VOLTAGE

This device works with a 3-phase connection (400 V +/- 10 %).

 
WELDING CURRENT
 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

 
POWER SWITCH
 
DISPLAY

Shows the welding / cutting parameters.

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

 
LOSS OF PHASE LED

The LED lights to indicate that the network connection of the phase has failed.

 
PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.

Additional Information

The following accessories can be used for the Plasma Cutter S-CUTTER 90 by Stamos Power:

Art. No.
Article
2124
Plasma Spare Parts Set - CUT 85 125 - H / CNC

Delivery Package

  • S-CUTTER 90
  • ground cable with clamp
  • hose package
  • accessories (see pictures)
  • instruction manual
  • Welding helmet "Carbonic"
  • Instruction manual