TIG Welding Machine Set - TIG AC/DC - welding cart - protective clothing - accessories

Manufacturer: Stamos Power ² | item number: EX18000298 | Model:

TIG Welding Machine Set - TIG AC/DC - welding cart - protective clothing - accessories
TIG Welding Machine Set - TIG AC/DC - welding cart - protective clothing - accessories
TIG Welding Machine Set - TIG AC/DC - welding cart - protective clothing - accessories
TIG Welding Machine Set - TIG AC/DC - welding cart - protective clothing - accessories
TIG Welding Machine Set - TIG AC/DC - welding cart - protective clothing - accessories
TIG Welding Machine Set - TIG AC/DC - welding cart - protective clothing - accessories
TIG Welding Machine Set - TIG AC/DC - welding cart - protective clothing - accessories
TIG Welding Machine Set - TIG AC/DC - welding cart - protective clothing - accessories
TIG Welding Machine Set - TIG AC/DC - welding cart - protective clothing - accessories
Tap to open gallery
1,099.00

Prices incl. VAT

  • Free shipment to Ireland

    ?

    This product is currently not available.

  • 30 days return service

    ?
  • 3 years guarantee

Product highlights

  • TIG AC - DC / MMA
  • 60 % duty cycle
  • 2-/4-stroke / Pulse function
  • Set with welding cart
  • Protective clothing and accessories

The inert gas welding machine is supplemented by a welding cart, which will make it much easier for you to transport the machine, as well as the gas cylinder (not included) for TIG welding. There is also a set of spare parts so you can replace wear parts such as ceramic nozzles or clamping sleeves anytime. A main focus during welding should always be on the protective clothing, so this set contains a welding helmet, matching screens, welding gloves and a welding hood. The welding set comes with a welding screen to help protect your surroundings.

Show more Show less

With a welding current from 10 to 220 A, the S-ALU 220 can be used for either TIG or MMA welding, depending on the type of metal and your welding conditions. This welder is also perfect for welding even thin metal sheets.

Show more Show less

The control panel is clearly arranged and is easy to use while wearing welding gloves. Five toggle switches allow you to directly choose the basic welding functions (TIG, MMA, AC, DC, 2T, 4T, Pulse, On, Off). You can set the required levels for power, pulse frequency, pulse width, gas post flow time and clean width using the 8 continuous control knobs. The large LED display lets you keep an eye on the current amperage.

Show more Show less

This welder gives you the option of welding with either AC or DC TIG, so you can work with either direct or alternating current, depending on the metal. Alternating current (AC) is suited for light metals such as aluminium or titanium. Direct current (DC) can be used for welding more robust metals such as steel, stainless steel, copper or brass.

Show more Show less

For TIG welding, simply select the pulse frequency on the control panel, which will enable you to precisely weld thin sheets, among other things. You can set various parameters including pulse frequency and initial, base or end current using the control knob.

Show more Show less

No additional gas is required for MMA (Manual Metal Arc) welding, enabling it to be used outdoors even in strong wind. The MMA welding clamp can grasp even large electrodes with a diameter of up to 4 mm. With the MMA welding method, you can weld materials such as steel, iron, cast iron, nickel or copper from 1,5 to 8 mm thick.

Show more Show less
  • Duty cycle of 60% at 220 A
  • TIG welder with AC and DC, also suitable for aluminium
  • Exact—precise welding thanks to perfect control of all welding parameters
  • Adjustable values for gas post flow time, pulse frequency, pulse, duty cycle and clean width
  • Powerful MOSFET technology with 2- / 4-stroke switch and HF ignition
Show more Show less

The welding cart included in the set not only has space on three levels for your professional welding machine, but also for all the accessories you need for welding. There is a space on the end of the cart for a gas cylinder, which you can secure there on a bracket and with the help of two steel chains. The two large rear wheels and the manoeuvrable front wheels make the trolley highly mobile, while the handle makes it easy to steer. Additionally you will receive as initial accessories for the ALU TIG welding device three ceramic nozzles (5, 6, 7 mm) and three clamping sleeves (2 / 2,4 / 3,2 mm), which you can immediately store on one of the shelves.

Show more Show less

Safety comes first when welding, which is why a welding helmet is indispensable to protect yourself from bright light, but as well as from welding spatter. The set includes the Blaster welding helmet from the Advanced series, which is very lightweight at approx. 500 g and can be adjusted to any head shape. The automatic welding helmet offers a light protection of DIN 9 - 13 and has an impressive reaction time of 1/30,000 seconds. To ensure that you always have a full view during welding, the welding helmet comes with ten matching inner screens.

Show more Show less

The hood included in the set is intended to be used as a supplement to your welding helmet to protect your head and neck. The hood is made of high-quality flame-retardant 11 OZ cotton fabric and is sewn with heat-resistant synthetic threads. The inner lining is made of comfortable cotton mesh and impresses with its exceptional cool wearing comfort.

Show more Show less

  • Duty cycle of 60% at 220 A
  • TIG welder with AC and DC, also suitable for aluminium
  • Welding cart is ideal for TIG welding
  • Comprehensive protection: Welding helmet, welding hood, welding gloves, protective screen
  • Additional accessories include clamping sleeves, ceramic nozzles and screens

TIG Welding Machine Set - TIG AC/DC - welding cart - protective clothing - accessories

With the TIG AC/DC welding machine S-ALU 220 from Stamos Germany, you get a professional and comprehensive welding tool for a wide variety of welding jobs. The set includes matching accessories that meet your high expectations—naturally also from Stamos Germany, the outfitter for welding professionals.

Model
S-ALU 220 TIG Set 2
Item number
18000298
Condition
New
Welder S-ALU 220
Functions
TIG AC / DC, MMA
Rated input voltage
230 V, 1 phase(s)
Frequency
50/60 Hz
Rated input current
23,7 A (TIG)
36,3 A (MMA)
input current
30,8 A (TIG)
47,2 A (MMA)
Rated input power
5,1 kVA (TIG)
7,8 kVA (MMA)
Max. input power
6,6 kVA (TIG)
10,1 kVA (MMA)
Open circuit voltage
59 V
Ignition (TIG)
HF - high-frequency
Welding current TIG-DC
10 - 220 A
Welding current TIG-AC
10 - 220 A
MMA welding current
10 - 220 A
Operating time / duty cycle
60 % (TIG)
60% (MMA)
Welding current at 100 % duty cycle
170 A (TIG)
170 A (MMA)
Welding current at 60 % duty cycle
220 A (TIG)
220 A (MMA)
Efficiency
80 %
Pulse current
10 - 220 A
Pulse frequency (AC mode)
0,5 - 5 Hz
Pulse frequency (DC mode)
0,5 - 5 Hz
Pulse width
10 % - 90 %
Current balance (AC)
20 - 80 %
Gas post-flow time
1 - 10 s
Gas pre-flow time
0,3 s
Diameter, electrode (TIG)
1 - 3,2 mm
Diameter, electrode (MMA)
1,6 - 4 mm
Welding strength (TIG)
1 - 6 mm
Welding strength (MMA)
1,5 - 8 mm
2- / 4-stroke switch
Yes
AC / DC switch
Yes
Pulse switch
Yes
Connection for foot pedal
Yes
Length of electrode holder with cable
3 m
Length, ground cable
3 m
Length, TIG hose package
4 m
Length of gas hose
3 m
Insulation class
F
Protection class
IP21
Device cooling
Fan
Torch cooling
Gas
Welding cart S-WECA-1
Material
Steel
Capacity
65 kg
Shelves
3
Dimensions, top shelf
33,3 x 53,2 cm
Dimensions, middle shelf
51,5 x 33,5 cm
Dimensions, bottom shelf
53 x 33,5 cm
Working height
75 cm
TIG spare parts [ 2,0 / 2,4 / 3,2 mm]
TIG ceramic nozzles
5, 6, 7 mm
Clamping sleeves
2,0 / 2,4 / 3,2 mm
Welding helmet Blaster
Material
Plastic
Head fit
Adjustable
Distance between face and visor
Adjustable
Field of vision
98 x 55 mm
Arc sensors
4
Power supply
Solar and 2 x CR2450 batteries
Light protection
DIN 9 - 13
Safety standard
DIN 4
Switching speed
1/30,000 sec
Delay (lightening)
0,25 - 0,8 s
Min. welding current
5 A
Optical class
1
Scattered light
2
Homogeneity
1
Angle dependency
1
Grinding mode
Yes
Operating temperature
-10 to +55 °C
Storage temperature
-20 to +70 °C
Inner Cover Lens 10 pcs for Firestarter500, Eagle Eye, Blaster
Quantity
10
Material
Polycarbonate
Colour
Transparent
Compatible with welding helmets
Firestarter5000, Eagle Eye, Blaster
Welding gloves SWG03-TITAN
Material
Cow split leather
Lining
Soft cotton
Material, threads
Synthetic fibres
Category
2
Size
10
Type
Type A
EN 12477 A
EN 388 and EN 407 combined requirements
EN 420
General requirements for protective gloves
EN 388 (4 5 2 2)
Protection against mechanical risks
Abrasion resistance
4
Cut resistance
5
Tear resistance
4
Puncture resistance
4
EN 407 (4 1 3 x 4 x)
Protection against thermal risks
Flammability resistance
4
Contact heat resistance
1 (up to 100 °C)
Convective heat resistance
3
Resistance to small splashes of molten metal
4
Welding hood SWH01
Material
Flame-retardant 11 OZ cotton fabric
Lining
Cotton mesh
Material, threads
Synthetic fibres
Category
1
Size
Universal
Fire protection
A1 A2
Welding screen SWS02
Material, curtain
Specially formulated vinyl
Material, threads
Synthetic fibres
Material, frame
Black painted steel
Diameter, steel pipe
2,2 cm
Wheel type
360° rotatable
Light transmission level (light source A > 0.0001)
0,93 %
Spectral reflectance (wavelength of 210 nm ≤ λ ≤ 313 nm)
< 0,002 %
Spectral reflectance (wavelength of 313 nm ≤ λ ≤ 400 nm)
 
< 3
Risk factor < 1 (400 nm ≤ λ ≤ 1400 nm)
0.6
Light transmission level (light source A, under UV radiation)
0,63 %
Light transmission level, relative change (under UV-radiation)
29,6 %
Risk factor < 1 (400 Nm ≤ λ ≤ 1400 nm, under UV radiation)
0.59
Moderate UV resistance
Yes
Flame-resistant
Yes
Distance between eyelets
304 mm (12 inch)
Material thickness         
0,4 mm
Welding curtain height
175 cm
Welding curtain width
239 cm
Frame height
196 cm
Frame width
239 cm
Dimensions (LxWxH)
48 x 24 x 50 cm
Weight
18,1 kg
Shipping dimensions (LxWxH)
66,4 x 31,5 x 56,2 cm
Shipping weight
27,45 kg
Delivery Package

ALU Welder S-ALU 220

  • Gas hose, 3 m
  • Earth cable with clamp: 3 m
  • Electrode holders with cable: 3 m
  • Welding torch, 4 m
  • 3 gas cans (1.6 / 2.4 / 3.3 mm)
  • Long torch cover
  • Tungsten electrode, Ø 2 mm
  • 3 clamping sleeves (5, 6, 7 mm)
  • Instruction manual

Welding cart S-WECA-1

  • Parts
  • Assembly instructions

TIG spare parts set 2.0/2.4/3.2

  • 3 ceramic nozzles (5, 6, 7 mm)
  • 3 clamping sleeves (2.0 / 2.4 / 3.2 mm)

Welding helmet Blaster

10-piece set of Inner Cover Lenses for Firestarter500, Eagle Eye, Blaster

Welding gloves SWG03-TITAN

Welding hood SWH01

  • Welding curtain with frame SWS02 30 cable ties   Instruction manual
 
MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Show moreShow less
 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
PROTECTIVE GAS

TIG/MIG and MAG welding require a protective gas. Inert gases, such as argon and helium, as well as active gases (for example carbon dioxide) and other mixtures can be used. The solenoid valve regulates the flow of gas. The valve is operated via a button on the torch.

Show moreShow less
 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
MMA WELDING CABLE CONNECTOR

 

 
TIG TORCH CONNECTOR

 

 
FOOT PEDAL CONNECTOR

This unit can also be operated using a foot pedal.

 
SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

 
NON-CONTACT HF-IGNITION

A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.

 
STARTING CURRENT

Value of the arc ignition output current. This current can be adjusted at will. For precision welding, it is recommended to start with reduced power, weld smoothly and eventually adjust the current accordingly.

Show moreShow less
 
WELDING CURRENT

 

 
FINAL CURRENT

The output current value before the end of the weld. Welding with the final current helps prevent a crater forming at the end of the weld.

 
GAS POST-FLOW TIME

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.

 
PULSE

This function reduces the heat to the material. It is primarily suitable for welding thin plates. If MIG welding is used, it is perfect for aluminium welding.

 
PULSE FREQUENCY

The frequency of impulses during pulse mode.

 
PULSE DUTY FACTOR

Relation of pulse duration to period duration.

 
IMPULSE CURRENT

The maximum value of the electric current while in pulse mode.

 
BASE CURRENT

The current which maintains the arc while in pulse mode.

 
POWER FACTOR CORRECTION

This is the percentage difference of the time between the positive and negative direction of the current during a welding period. This feature allows control of the width of the welding seam and the depth of penetration.

Show moreShow less
 
CLEAN WIDTH - PARAMETERS OF POWER FACTOR CORRECTION

This is the percentage difference of the time between the positive and negative direction of the current during a welding period.

 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
4-STROKE

By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

Show moreShow less
 
TIG WELDING

A welding method in which the arc is maintained through an electrical current supplied from a non-consumable electrode. The arc is protected from the access of air by an inert gas.

Show moreShow less
 
MMA WELDING

Electrode welding with a coated electrode.

 
POWER SWITCH

 

 
"2T / 4T" SELECTION SWITCH

Choose between the 2T and 4T mode.

 
TIG AC/DC MODE SWITCH

TIG welding is divided into AC (alternating current) and DC (direct current) welding.

 
PULSE FUNCTION SWITCH

Used to switch the pulse function on and off.

 
SWITCH BETWEEN THE WELDING METHODS

By using the SHIFT key the welding mode can be selected.

 
DISPLAY

Shows the welding / cutting parameters.

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

What is the quality of the welding seams on aluminium?

The machine has been tested by our technical department and shows very good results when welding aluminium.

Write the first review for this product



Leave a review (5 stars is highest, 1 is lowest)
Click on the link sent to your e-mail address and confirm your opinion! It will be published after verification.

The fields marked with * are required.

expondo expert

Still not sure?

Our experts are ready to help!
+44 20 376 988 02
Mon - Fri 09:30am - 04:30pm
This product
  • TIG AC - DC / MMA
  • 60 % duty cycle
  • 2-/4-stroke / Pulse function
  • Set with welding cart
  • Protective clothing and accessories

This product is currently not available.

TIG Welding Machine Set - TIG AC/DC - welding cart - protective clothing - accessories

TIG Welding Machine Set - TIG AC/DC - welding cart - protective clothing...

1,099.00€  

This product is currently not available.

  • TIG AC - DC / MMA
  • 60 % duty cycle
  • 2-/4-stroke / Pulse function
  • Set with welding cart
  • Protective clothing and accessories
  • TIG AC-DC / MMA
  • POWER
  • 220 A / 230 V
  • 2/4 tact
  • power ventilators

Ready to ship today,
Delivery time appr. 4-7 workdays

Aluminium Welder - 220 A - 230 V - Pulse - 2/4 Tact

Aluminium Welder - 220 A - 230 V - Pulse - 2/4 Tact

(15)
Instead of: 649.00€   589.00€  

Ready to ship today,
Delivery time appr. 4-7 workdays

  • TIG AC-DC / MMA
  • POWER
  • 220 A / 230 V
  • 2/4 tact
  • power ventilators
  • TIG AC-DC / MMA
  • 220 A / 60 % DC
  • 2-/4-step / Pulse function
  • Foot pedal with 8 m cable

Ready to ship today,
Delivery time appr. 4-7 workdays

Aluminium welder - TIG AC/DC - 220 A - 8 Metres Cable - Pulse

Aluminium welder - TIG AC/DC - 220 A - 8 Metres Cable - Pulse

(1)
Instead of: 779.00€   639.00€  
  • TIG/MMA/Plasma
  • SELECTION
  • 180 A/230 V
  • Hot start
  • LED display

Ready to ship today,
Delivery time appr. 4-7 workdays

Combined Welder - TIG 180 A - cut 40 A - MMA

Combined Welder - TIG 180 A - cut 40 A - MMA

(4)
Instead of: 519.00€   419.00€