The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Powerful fans ensure an optimal removal of heat from the unit.

TIG/MIG and MAG welding require a protective gas. Inert gases, such as argon and helium, as well as active gases (for example carbon dioxide) and other mixtures can be used. The solenoid valve regulates the flow of gas. The valve is operated via a button on the torch.

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

This device works with a 1-phase connection (230 V +/- 10 %).

A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

A welding method in which the arc is maintained through an electrical current supplied from a non-consumable electrode. The arc is protected from the access of air by an inert gas.

Electrode welding with a coated electrode.

By using the SHIFT key the welding mode can be selected.

Shows the welding / cutting parameters.

The LED light indicates overheating or a malfunction.