Plasma Cutter - 70 A - 400 V
Manufacturer: Stamos Power ² | item number: EX10020154 | Model: S-CUTTER 70.1
Prices incl. VAT plus shipping costs*
-
Free shipment to Ireland
?Ready to ship today,
Delivery time appr. 4-6 workdays -
30 days return service
?
Product Highlights
- Plasma
- Power
- 400 V
- Cutting current: 10 - 70 A
- Cutting thickness: 20 mm
- Plasma cutter S-CUTTER 70.1
- Plasma torch 4,85 m
- Gas hose
- Ground cable with clamp - 3 m
- Plasma electrode - 1 pc.
- Shield cup - 1 pc.
- Clamping ring - 2 pcs.
- Power cable without power plug
- Instruction manual
The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.
Show moreShow lessPowerful fans ensure an optimal removal of heat from the unit.
For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.
Show moreShow lessOn the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².
This device works with a 3-phase connection (400 V +/- 10 %).
The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.
Start the weld by placing pressure on the torch button. Stop the process by releasing the button.
By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.
Show moreShow lessThe plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.
Choose between the 2T and 4T mode.
Shows the welding / cutting parameters.
Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.
A pilot arc is ignited by pressing the torch's trigger. Thus, grates can be cut.
Je to velmi dobrý produkt. Skvělý poměr cena - výkon.
Jednoduché a přesné ovládání a nastavování hodnot.
Výborné balení - bezpečné pro přepravu i uložení.
- P60 spare parts
- Set of 10 pieces
- 2 ceramic nozzles
- 4 electrodes
- 4 cutting nozzles
Ready to ship today,
Delivery time appr. 4-6 workdays

Plasma Spare Parts Set - P60
- Magnifying glass
- 2.0 dioptre / 1.5 x larger
- precise welding
- 5,00 x 10,80 x 0,30 cm
- Suitable for almost all welding helmets
Ready to ship today,
Delivery time appr. 4-6 workdays

Magnifying Glass 2.0 for welding helmets
- for all common welding procedures
- Light protection DIN 4 – 8 or DIN 9 - 13
- 100 x 65 mm field of view
- Switching time 1 / 30,000 s
- Delay time (0.25 - 0.8 s)
Ready to ship today,
Delivery time appr. 4-6 workdays

Welding helmet –Carbonic - PROFESSIONAL SERIES
- for all common welding procedures
- Light protection DIN 9 - 13
- 95 x 36 mm field of view
- Switching time 1 / 25,000 s
- Delay time (0.25 - 0.8 s)
Ready to ship today,
Delivery time appr. 4-6 workdays

Welding helmet – Sub Zero - EASY SERIES
- Cutting current: 20 - 70 A
- Cutting capacity up to 20 mm
- Pilot arc
- LED display
- 400 V
Ready to ship today,
Delivery time appr. 4-6 workdays

Plasma Cutter - 70 A - 400 V - pilot arc
- Cutting current: 20 - 85 A
- Cutting depth up to 27 mm
- Pilot arc
- 2 T / 4 T switch
- 400 V
Ready to ship today,
Delivery time appr. 4-6 workdays

Plasma Cutter - 85 A - 400 V - pilot arc