The S-CUTTER 100C plasma cutter from Stamos Power ² gives you active support when cutting metal materials. It offers plenty of power reserves for cutting thick metal materials using air plasma. The plasma cutting device is impressive with its special features, such as; a powder-coated sheet steel housing, high cost-effectiveness and first-class cutting power.

With a cutting depth for carbon steel of up to 40 mm, the plasma cutter is just as equipped for demanding tasks in repair and renovation as it is for efficient use in production or the workshop. The high performance is made possible by the particularly reliable IGBT inverter technology. You can select the external compressor according to your requirements and circumstances and set the air pressure for plasma cutting via the external pressure reducer. This proves the unit to be very flexible and easy to transport. 

With a power-on time of 60%, the cutting current is 100 A. With a working range between 30 and 100 A, Stamos Power ² provides the necessary flexibility when choosing the cutting current. All values are shown precisely on the LCD display. The high-frequency ignition works without contact and is extremely reliable. For an optimal cutting joint, the device offers a gas post-flow time of 10 s. The air blows the kerf clean and prevents contamination during the cut, while the cutting torch is cooled at the same time.

The plasma cutter from Stamos Power ² works with a 400 V three-phase operating voltage and cuts workpieces from a wide variety of metal materials. This includes low- and high-alloy steels as well as the non-ferrous metals aluminium, copper and titanium. With a 5 m long plasma hose in connection with the 3 m long grounding cable, the plasma cutter offers a high degree of freedom of movement.

The power unit of the plasma cutting device is protected against damage by fan cooling and overheating protection. The cutting torch is cooled by the compressed air. The powder-coated steel casing reliably protects the technology in the device, a handle facilitates the transport of the plasma cutter.