Factory seconds Plasma Cutter - 50 A - 230 V

299.⁰⁰€ Prices incl. VAT 369.00€

(0)

Preview: Factory seconds Plasma Cutter - 50 A - 230 V

Factory seconds Plasma Cutter - 50 A - 230 V

Instead of: 369.00€ You save 70.00€ 299.⁰⁰€ Instead of: 369.00€

Prices incl. VAT

Factory seconds

Our factory seconds are generally refurbished customer returns or former display items. The products may have cosmetic defects but are technically flawless. As usual, we provide the normal right of return and warranty.

Product highlights

Plasma
Power
230 V
Cutting current: 10 - 50 A
Cutting thickness: 12 mm

Model

S-CUTTER 50.1

Condition

Factory seconds

Rated input voltage

230 V, 1-Phase

Input frequency

50 Hz

Input current

22,2 A

Input current max.

28,6 A

Power input

4,8 kVA

Input power max.

6,6 kVA

Open circuit voltage

244 V

Cutting current

10 - 50 A

Duty Cycle

60 %

Cutting current at 100% DC

38,7 A

Cutting current at 60% DC

50 A

Post-gas

~20 s

Ignition

Contact ignition

Cutting capacity

12 mm

Cutting width

2.0-3.0 mm

Air flow

160 l/min

Air pressure

3,5 bar

Length of hose pack

4,85 m

Length of ground cable

3 m

Length power cable connection

2,1 m

Cooling device

Fan

Torch cooler

Air

Power factor

0.73

Efficiency (under rated power)

≥80

Insulation class

Protection class

IP21

Dimensions (LxWxH)

43 x 16,5 x 31,5 cm

Weight

11,9 kg

Shipping dimensions (LxWxH)

55,3 x 26,8 x 42,1 cm

Shipping weight

15,05 kg

Technical drawing

Download PDF

Manual

Download PDF

Delivery Package

Plasma cutter S-CUTTER 50.1
Plasma torch 4,85 m
Gas hose 3 m
Ground cable with terminal 3 m
Plasma electrode - 1 pc
Clamping ring - 2 pcs
Instruction manual

MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Show moreShow less

VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

Show moreShow less

EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

GROUND TERMINAL CONNECTOR

CUTTING TORCH CONNECTION

SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

GAS POST-FLOW TIME

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.

2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

4-STROKE

By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

Show moreShow less

PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

POWER SWITCH

"2T / 4T" SELECTION SWITCH

Choose between the 2T and 4T mode.

DISPLAY

Shows the welding / cutting parameters.

OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.