Stick Welder - 200 A - 230 V - Hot Start

With the S-MMA 200P.IGBT electrode welding machine from Stamos Germany, you will find a professional, innovative and high-quality hand-held welding machine for various repair and maintenance tasks. This welding device is suitable for electrode welding due to 230V alternating current.

The S-MMA 200P.IGBT inverter is the perfect helper for indoor and outdoor welding thanks to its lightweight and compact design as well as its carrying strap. The welding current of the MMA welding machine can be set comfortably in the range of 20-200A with an infinitely variable controller, displaying the value on the digital LED display, which also serves as a status light.

The duty cycle of the welding machine is 45%. The device can be used within a 10 of minute cycle 4.5 minutes with full welding power capacity of 200A. To achieve a 100% duty cycle, the welding current must be reduced to 134A. With this setting you will be able to weld without interruption.

The Hot-Start-function of the electrode welder procures an automatic and short-term increase of the welding current. Thanks to this “Hot Start”, the starting point is immediately heated to the optimal temperature and the electrodes do not clog. You get perfect welding results from the first.

In the case of hand-held welding, no gas is required, which means that the device can be used in adverse conditions (such as winds) and still maintain clean welding results. The electrode functions as a current conductor, protective gas and as a bonding consumable.

The IGBT inverter is particularly suitable for iron or copper as well as alloys such as steel or cast iron. The welding machine impresses with a very stable welding current, which allows for a high quality weld seams and is also able to weld very thin sheets with a thickness of 1.5 mm or more.