Welding Set Plasma Cutter - 120 A - 400 V - pilot ignition + Welding helmet –Pokerface - PROFESSIONAL SERIES

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Powerful fans ensure an optimal removal of heat from the unit.

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

This device works with a 3-phase connection (400 V +/- 10 %).

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

Shows the welding / cutting parameters.

The LED light indicates overheating or a malfunction.

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.