Welding Set Combined Welder - TIG 160 A - Cut 40 A - MMA + Welding helmet – Eagle Eye - ADVANCED SERIES

Welding Set Combined Welder - TIG 160 A - Cut 40 A - MMA + Welding helmet – Eagle Eye - ADVANCED SERIES

Play Video

528.⁰⁰€

Prices incl. VAT plus shipping costs*

Free shipment to Ireland
?

This product is currently not available.
30 days return service
?
3 years guarantee

Product highlights

TIG / Plasma / MMA
BASIC
160 A / 230 V
welding power: 6 mm
power ventilators

plasma cutter CUT-40
MMA inverter 160 A
TIG DC inverter 160 A

precise, stable plasma arc for targeted and concentrated heat input
high cutting speed, deep cut, minimal material consumption
constant results thanks to separate inverter for assisting arc current
ideal safety conditions for the plasma torch through supervision of compressed air flow

ARC-Force function
Anti-Stick function
automatic adjustment of ignition power (with use of HF as well as Liftarc ignition)

use the advantages of the TIG welding procedure:

almost no weld spatter
only low health risks through welding fumes
only little warping of workpiece through spatially limited heat input
non-melting electrode

almost no weld spatter
only low health risks through welding fumes
only little warping of workpiece through spatially limited heat input
non-melting electrode

Adjustable helmet
Visor-face distance adjustable
Light protection DIN 9 - 13
98 x 55 mm field of view
Viewing angle adjustable
Light protection for all common welding processes
Delay time (0.25 - 0.8 s)
Switching time 1 / 30,000 s

You will save up to 3% when purchasing this set, compared to a single item order

Welder

The 3-in-1 welding machine S-MULTI 41 by Stamos Germany is a device that can perform a multitude of welding and cutting operations. It can be used as a plasma cutter CUT-40, an MMA welder with a welding current of up to 160 A and a TIG DC welder, also with a welding current of up to 160 A. By buying the S-MULTI 41, you eliminate the need for purchasing multiple expensive specialised welding machines. The S-MULTI 41 is also set apart through its robustness and the use of the most recent technology, which makes it highly reliable. It has an input voltage of 230 V and, thanks to the use of lightweight but stable materials, a weight of only 13 kg with dimensions of 20,5 x 43 x 32 cm, which makes transporting the machine easy. The S-MULTI 41 can be used as:

Plasma cutter CUT-40:

MMA inverter 160 A:

TIG DC inverter 160 A:

Welding helmet

The Eagle Eye welding helmet by the Advanced Series from Stamos Germany - the best choice for professional and hobby welders

The automatic Eagle Eye welding helmet from the Advanced Series from Stamos Germany is characterized by its light weight and good response speed. The welding helmet is extremely versatile and can be used within all common welding processes (MIG welding, MAG / CO2 welding, manual welding, TIG welding, plasma cutting and micro plasma cutting).

In addition, the automatic welding helmet Eagle Eye is known for its long-lasting visibility (cartridges). The cartridges are powered by solar cells and 2 CR2450 batteries. The welding helmet works with an exemplary range of light protection from DIN 9 - 13. The size of the screen is an extraordinary 98 x 55 mm. In this way, you can always keep an overview of all the essential details.

The welding helmet is made of robust plastic. This ensures that the welding mask weighs only about 500 grams and that you do not have to worry about any restrictions or pain during work. A particularly prominent characteristic of the Blaster is the simple adaptation to every head shape. Also adjustable is the distance between the face and the visor. This guarantees that the helmet sits extremely securely and can be used first-class.

In addition, Advanced Series welding helmets have an outstanding response time of 1 / 30,000 seconds from light to dark. This means that you are always protected from dangerous arcs. The outstanding reaction time also allows for a seamless transition without the eyes being too stressed or requiring a prolonged adaptation time.

The automatic Eagle Eye welding helmet can be used with not only all common welding processes and also has a practical grind mode. Thus, the helmet can be used for pure roughing, cutting and grinding work without an annoying up-and-down use. Whether you are a craftsman, want to use the welding helmet for private use, or to be used in the workshop, the Eagle Eye combines all the necessary protective mechanisms and ensures quality and longevity.

Model

S-MULTI 41

Item number

2013

Condition

New

Input voltage

230 V, 1-Phase

Frequency

50 / 60 Hz

Input current

17 A

Max. input current

24 A

Input power

3,7 kVA

Max. input power

5,2 kVA

Function

TIG

MMA

CUT

Open circuit voltage

56 V

230 V

Welding / Cut current

10 - 160 A

0 - 40 A

Duty cycle

60%

Welding / Cut current at 100% duty cycle

124 A

30 A

Welding / Cut current at 60% duty cycle

160 A

40 A

Ignition

HF - high frequency

Contact

Gas magnetic valve

Yes

Electrode diameter (TIG)

1 - 3,2 mm

Electrode diameter (MMA)

1 - 4 mm

Welding power

6 mm

Cutting power

12 mm

Length of hose package (TIG)

4 m

Length of cable (MMA)

3,5 m

Length of hose package (CUT)

4 m

Length of ground cable

3,6 m

Length of power cable

1,2 m

Cooling

Ventilator

Burner cooling

Air

Power factor

0.93

Efficiency (at rated power)

≥ 85

Insulation class

Protection class

IP20S

Dimensions (LxWxH)

20,5 x 43 x 32 cm

Weight

13 kg

Shipping dimensions (LxWxH)

63,5 x 29 x 41 cm

Shipping weight

21,5 kg

Model

Eagle Eye

Article number

2983

Condition

New

Material

Plastic

Head fitting

Adjustable

Face-sight-clearance

Adjustable

Field of view

98 x 55 mm

Arc sensors

Power supply

Solar and 2 x batteries CR2450

Light protection

DIN 9 - 13

Light level

DIN 4

Switching time

1/30.000 s

Delay (when lightened)

0,25 - 0,8 s

Minimum welding current

5 A

Optical class

Scattered light

Homogeneity

Viewing angle dependency

Grind-Mode

Yes

Operating temperature

-10 to +55 °C

Storage temperature

-20 to +70 °C

Dimensions (LxWxH)

20,5 x 43 x 32 cm

Weight

13 kg

Shipping dimensions (LxWxH)

63,5 x 29 x 41 cm

Shipping weight

21,5 kg

Delivery Package

S-MULTI 41
electrode holder, cable length: 3.5 m
plasma torch with hose package, length: 4 m
TIG torch with hose package, length: 4 m
ground cable with clamp, length: 3.6 m
air hose
pressure valve and manometer
wear parts for TIG torch (see picture)
wear parts for plasma cutter (see picture)

Welding helmet "Eagle Eye"
Instruction manual

MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Show moreShow less

VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

PROTECTIVE GAS

TIG/MIG and MAG welding require a protective gas. Inert gases, such as argon and helium, as well as active gases (for example carbon dioxide) and other mixtures can be used. The solenoid valve regulates the flow of gas. The valve is operated via a button on the torch.

Show moreShow less

GAS / AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

Show moreShow less

EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

GROUND TERMINAL CONNECTOR

MMA WELDING CABLE CONNECTOR

TIG TORCH CONNECTOR

CUTTING TORCH CONNECTION

SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10%).

NON-CONTACT HF-IGNITION

A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.

WELDING CURRENT

GAS POST-FLOW TIME

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.

2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

HOT START

Through automatically boosting the tension at the ignition of the arc, this function facilitates the electrical arc ignition. After ignition, the unit automatically returns to the pre-set voltage.

Show moreShow less

ARC-FORCE

The current value increases automatically when the arc is shorter.

ANTI-STICK

This function helps to prevent overheating of the electrode by switching off the welding current when the electrode sticks to the material.

TIG WELDING

A welding method in which the arc is maintained through an electrical current supplied from a non-consumable electrode. The arc is protected from the access of air by an inert gas.

Show moreShow less

MMA WELDING

Electrode welding with a coated electrode.

PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

POWER SWITCH

OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.