Electrode Welder - 180 A - IGBT - 80% duty cycle
249.00 Prices incl. VAT

Electrode Welder - 180 A - IGBT - 80% duty cycle

Manufacturer: Stamos Basic | item number: EX10020017 | Model: S-MMA-180-PI

Electrode Welder - 180 A - IGBT - 80% duty cycle
Electrode Welder - 180 A - IGBT - 80% duty cycle
Electrode Welder - 180 A - IGBT - 80% duty cycle
Electrode Welder - 180 A - IGBT - 80% duty cycle
Electrode Welder - 180 A - IGBT - 80% duty cycle
Electrode Welder - 180 A - IGBT - 80% duty cycle
Play Video
360° photo
Tap to open gallery
249.00

Prices incl. VAT

  • Free shipment to Ireland

    ?

    Ready to ship today,
    Delivery time appr. 4-7 workdays

  • 30 days return service

    ?
  • 3 years guarantee

Product highlights

  • MMA
  • Basic
  • 180 A / 230 V
  • 80 % duty cycle
  • Hot start

  • Powerful – up to 180 A
  • Enduring – with a duty cycle of 80%
  • Efficient – clean welding results with hot start function
  • Cutting-edge – IGBT inverter technology
  • Mobile – thanks to shoulder strap

Electrode Welder - 180 A - IGBT - 80% duty cycle

The electrode welder S-MMA-180PI from STAMOS Germany with IGBT inverter technology convinces with its high performance and compact design. The long-lasting 180 A make the electrode welding machine not only suitable for welding in the workshop or on the factory floor, but also for mobile repair and maintenance work outdoors.

At a full 180 A, the welder can achieve a duty cycle of 80 %. If the power is reduced to 161 A, the duty cycle can be increased to the point where you can weld without interruption. The MMA welding machine does not require shielding gas, so you can work precisely even under adverse conditions, such as in strong winds.

The arc welder is equipped with practical and cutting-edge features such as an IGBT inverter, which enables you to quickly produce clean, safe welds with little effort. You can smoothly and precisely set the welding current to between 20 and 180 A using the control knob.

The welding machine enables you to correctly install and maintain railings, stairs, gates, doors, containers or metal machinery. With the MMA welder, you can weld materials such as steel, iron, cast iron, nickel or copper from 1,5 mm thick.

The hot start function on the electrode welder ensures an automatic and short-term increase of the welding current at the start of the welding process. This hot start optimally and instantly heats the weld at the starting point, which prevents the electrode from sticking and guarantees stable and clean welding results from the first moment.

The air cooling and overheat protection (displayed next to the control knob) guarantee the long-lasting functional reliability of this MMA welder. The device can be used nearly anywhere that can be supplied with electricity via a socket with a 230 V / 1-phase connector. The welding machine is equipped with a shoulder strap for convenient transportation.

Model
S-MMA-180-PI
Condition
New
Rated input voltage/Frequency
230 V / 50 Hz
Rated input current
22 A
Rated input power
4,7 kVA
Max. input current
28 A
Max. input power
6 kVA
Open circuit voltage
56 V
Welding current
20 - 180 A
Operating time / duty cycle
80 %
Welding current at 80 % duty cycle
180 A
Welding current at 100 % duty cycle
161 A
Diameter, electrodes
1,6 - 4 mm
Material thickness for welding
1,6 - 7 mm
Hot start
Yes
Device cooling
Fan
Efficiency
0.85
Insulation class
B
Protection class
IP21
MMA cable
3,6 m
Earth cable
3,6 m
Dimensions (LxWxH)
39 x 25 x 12 cm
Weight
5,6 kg
Shipping dimensions (LxWxH)
51 x 21,5 x 33 cm
Shipping weight
9 kg
Technical drawing
Delivery Package
  • Electrode welder S-MMA-180-PI
  • Electrode holders with cable 3.6 m
  • Earth cable with clamp 3.6 m
  • Instruction manual
 
IGBT

IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode. This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology.

Show moreShow less
 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
MMA WELDING CABLE CONNECTOR

 

 
SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

 
WELDING CURRENT

 

 
HOT START

Through automatically boosting the tension at the ignition of the arc, this function facilitates the electrical arc ignition. After ignition, the unit automatically returns to the pre-set voltage.

Show moreShow less
 
MMA WELDING

Electrode welding with a coated electrode.

 
POWER SWITCH

 

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

Where can I find a suitable welding hood?

You can find welding helmets in expondo's online shop under the category Welders, subcategory Welding Helmets, where you can browse a wide selection of helmets.

How can I stay up-to-date on new products and offers?

Sign up for our newsletter and keep yourself up-to-date!

3 Based on 1 reviews

Sort by...

Leave a review (5 stars is highest, 1 is lowest)
Click on the link sent to your e-mail address and confirm your opinion! It will be published after verification.

The fields marked with * are required.

Reviews from Kyrre Karlsen (3 Nov 2022)
Reviews from Kyrre Karlsen (3 Nov 2022) MMA/TIG

greit sveise apparat til en fornuftig penge men det står at den har Tig og Anti stick noe som ikke stemmer, det er dårlig at de reklamerer med det når apparatet ikke har det. Synes at det burde de gjøre noe med eller så mister de kunder.

expondo experts reply 18 Nov 2022

Takk for at du delte. 

Vi liker en god idé! 

Vi vil se nærmere på dette og gjøre vårt beste for å få det til! 

expondo expert

Still not sure?

Our experts are ready to help!
+44 20 376 988 02
Mon - Fri 09:00am - 04:00pm
Welding apron - Cow split leather - Size L
75.00€
Prices incl. VAT plus shipping costs
Schweißhelm – Sub Zero – EASY SERIES - 2981 - 1
75.00€
Prices incl. VAT plus shipping costs
This product
  • MMA
  • Basic
  • 180 A / 230 V
  • 80 % duty cycle
  • Hot start

Ready to ship today,
Delivery time appr. 4-7 workdays

Electrode Welder - 180 A - IGBT - 80% duty cycle

Electrode Welder - 180 A - IGBT - 80% duty cycle

(1)
249.00€  

Ready to ship today,
Delivery time appr. 4-7 workdays

  • MMA
  • Basic
  • 180 A / 230 V
  • 80 % duty cycle
  • Hot start
  • MMA
  • Basic
  • 200 A / 230 V
  • 80 % duty cycle
  • Hot start

Ready to ship today,
Delivery time appr. 4-7 workdays

Electrode Welder - 200 A - IGBT - 80% duty cycle

Electrode Welder - 200 A - IGBT - 80% duty cycle

(2)
219.00€  

Ready to ship today,
Delivery time appr. 4-7 workdays

  • MMA
  • Basic
  • 200 A / 230 V
  • 80 % duty cycle
  • Hot start
  • E-Hand / Pro Series
  • Power: 250 A
  • 8 m cable package
  • IGBT-Inverter
  • Electrodes up to Ø 5 mm

Ready to ship today,
Delivery time appr. 4-7 workdays

Electrode Welder - 250 A - 8 m cable - hot start - PRO

Electrode Welder - 250 A - 8 m cable - hot start - PRO

(154)
Instead of: 199.00€   169.00€  
  • TIG - MIG / MAG-MMA - FCAW
  • 230V
  • 50 Hz
  • Welding current up to 195 A
  • IGBT

Ready to ship today,
Delivery time appr. 4-7 workdays

Combined Welder - TIG - MIG/MAG - E-Hand - FCAW - 195 A

Combined Welder - TIG - MIG/MAG - E-Hand - FCAW - 195 A

(10)
Instead of: 719.00€   539.00€