The high-powered engine oil extractor makes for a fast emptying due to a very high working pressure up to 9 bar. This applies to cold and hot oil, as well as for all non-aggressive fluids class A-III from vehicles, such as power steering fluid.
The probes made of nylon or metal (included in delivery) with varying diameter allow for an easy access to the drain valves of engines from various manufacturers. The targeted selection of the probes can influence the emptying speed and, if necessary, increase it to save time: Diameter of the probe 5 mm = 1.2 l / min; 6 mm = 3.2 - 4.2 l / min; 8 mm = 4.2 l / min.
Especially handy: During the oil extraction, the fill level can be read through the transparent level indicator of the measuring container. Since the measuring container and the tank are filled at the same time, the amount of extracted oil can be increased up to 9 bar above the working pressure. When the indicator on the analogue vacuum gauge reaches the position between the red and the green mark, the oil suction is completed.
The engine oil extractor is very mobile. The device has movable PVC front wheels, which can navigate in all directions even in confined spaces. The wheels are shock-absorbing, cost-effective and easy to replace. With the sturdy ergonomic handle, the engine oil extractor can even be moved over steps.
The height of the 10-litre drip tray can be adapted to your requirements, which makes it very flexible. The high-quality, stable drip tray has a filter screen for contamination and is resistant to weather, temperature and corrosion.
The engine oil extractor is made of solid powder-coated steel with a compact, efficient air filter, which is state-of-the-art in the field of air pollution control. Environmentally friendly and carefree: With a low energy consumption compared to other oil extractors.
The concerns of work safety were not disregarded. The power for the oil extraction is obtained from unproblematic, adjustable compressed air and is protected by a safety valve against overpressure. By the way: If necessary, the oil drain can also be carried out without compressed air, simply by utilizing the G-force.